PN-60TA3 (serv.man7). Network Tool - Sharp Monitor User Guide / Operation Manual. Page 26

 

 

You can control when profiles are updated in your copiers if your host IP address is changed 
using system commands.   If this is done, the addresses stored in the profiles in your copiers 
will not match your new address and you will not be able to scan to your desktop from the 
copiers. 
 

 

 
There are two choices: 

 

Update Automatically (default):  When this option is selected, the profiles in the 
copiers will all be updated the next time you reboot your PC.

 

 

Update Now:  If you select this option, the profiles will be updated with the new 
information immediately.  In addition to updating the current profiles with the new 
host IP address, any profile previously blocked from being sent to the copiers  (for 
instance, the copier was powered down when originally sent) will now be delivered. 

 
The Scanning Progress dialog will be displayed while the profiles are being updated: 
 

 

 

You may not cancel an update process until it completes. When the update is complete, the 
Cancel button will change to a Close button. If you want to see what happened during the 
update, press the Show Details button: 

Network Scanner Tool Lite User’s Guide 

22