Read Sharp PN-60TA3 (serv.man5) Service Manual online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
OUTLINE OF THE PRODUCTS 1 - 14
3- 3. TOUCH PEN
PN-ZL01 : Touch pen + Pen adaptor
PN-ZL02 : Touch pen
Function button 1 : Right mouse click
Function button 2 : PageDown
Function button 3 : PageUP
State LED
Normal
state
Standby state
*1
LED is OFF
Function button is ON.
LED is ON
Pen tip is ON
LED is OFF
Special
state
Under pairing/Under selecting
the menu of driver
LED is flashing
(1)
*2
When the error is occurred
LED is flashing
(2)
*3
State for allowing the firmware
update
LED is ON
The data is being received or
updated
LED is flashing
(3)
*4
*1：Standby state ：Moves to the low power consumption without
pen operation for 60 seconds.
*2：LED is flashing (1)：1 second ON -> 1 second OFF) -> Repeat
this operation.
*3：LED is flashing (2)：0.5 seconds ON -> 0.5 seconds OFF ->
0.5 seconds ON -> 0.5 seconds OFF -> 0.5 seconds ON ->
3.5 seconds OFF -> Repeat this operation
*4：LED is flashing (3)：0.5 seconds ON -> 0.5 seconds OFF ->
Repeat this operation
■
Inserting the battery
1) Remove the battery cap.
2) Open the cover and insert the supplied battery (LR-03(“AAA”
size) into the touch pen.
Check the plus (+) and minus (-) markings on the inside
of the touch pen and insert the battery in the correct orientation.
3) Close the cover.
(MEMO)
• The supplied battery (LR-03 (“AAA” size)) may be exhausted in a
short time, depending on how it was stored.
• If the touch pen will not be used for an extended time, remove
the battery from the touch pen.
• For the battery, use an alkaline battery
.
■
Connecting the touch pen adapter
To use the touch pen, insert the touch pen adapter into the
touch pen adapter port on the monitor.
touch pen adapter port on the monitor.
Click on the first or last page to see other PN-60TA3 (serv.man5) service manuals if exist.