Read Sharp PN-60TA3 (serv.man5) Service Manual online
PN-L703A/L703B, PN-70TA3/70TB3, PN-L603A/L603B, PN-60TA3/60TB3
OUTLINE OF THE PRODUCTS 1 - 13
■
Installing the batteries
1) Press the cover gently and slide it in the direction of the arrow.
2) S See the instructions in the compartment and put in the
supplied batteries (R-6 (“AA” size) x 2) with their plus (+) and
minus (-) sides oriented correctly.
3) Close the cover.
(MEMO)
• When the batteries become exhausted, replace them with new
(commercially available) batteries.
•The supplied batteries (R-6 (“AA” size) x 2) may become
exhausted quickly depending on how they are stored.
• If you will not be using the remote control for a long time, remove
the batteries.
• Use manganese or alkaline batteries only.
■
Remote control operation ranges
The operation range of the remote control unit is approx. 16.4 feet
(5 m) at an angle of approx 10° from the center to the
top/bottom/right/left of the remote control sensor.
(MEMO)
• Do not expose the remote control unit to shock by dropping or
stepping on it. This could lead to a malfunction.• Do not expose
the remote control unit to liquids, and do not place it in an area
with high humidity
• The remote control unit may not work properly if the remote
control sensor is under direct sunlight or strong lighting.
• Objects between the remote control unit and the remote control
sensor may prevent proper operation.
• Replace the batteries when they run low as this may shorten the
remote control’s operation range.
• If a fluorescet light is illuminated near the remote control unit, it
may interfere with proper operation.
• Do not use it with the remote control of other equipment such as
air conditioner, stereo components, etc.
Click on the first or last page to see other PN-60TA3 (serv.man5) service manuals if exist.