PN-525E (serv.man3) - Sharp Monitor Service Manual (repair manual). Page 8

PN-525E

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 6

* With a monitor with a screen resolution of 1600 x 1200, selecting Dot-

byDot displays the NORMAL screen.

Note:

•  Using this monitor's screen-size switching or dual-screen display

functions to compress or expand the screen for commercial or pub-
lic viewing in establishments like cafes or hotels may infringe on the

rights of the creators, as protected by Copyright Law, so please be

careful.

•  When “Enlarge” is set, the screen size is fixed to “WIDE” mode.

•  When dual-screen display is selected, the screen size cannot be

changed.

•  The appearance of the original video may change if you select a

screen size with a different aspect ratio than the original image

(e.g. TV broadcast or video input from external equipment).

•  When an ordinary non-wide image (4:3) is viewed with the whole

screen using the screen-size switching function of this monitor, the

edge of the image may be lost or appear distorted. If you wish to

respect the creator’s intentions, set the screen size to “NORMAL”.

•  When playing commercial software, parts of the image (like subti-

tles) may be cropped. In this case select the optimal screen size

using the screen-size switching function of this monitor. With some

software, there may be noise or distortion at the edges of the
screen. This is due to the characteristics of the software, and is not

a malfunction.

•  Depending on the original image size, black bands may remain at

the edges of the screen.

■ SCHEDULE

You can set the time to switch the monitor on and off.
Set this function with “SCHEDULE” in the OPTION menu.

1) Press 

 or 

 to select the SCHEDULE number, and press

 .

2) Set the SCHEDULE. (See the description below.)

Press 

 or 

 to select the date and time, and press 

 or

 to change the setting.

3) Press .

SCHEDULE becomes effective.

Caution:

•  Do not switch off the main power after setting the SCHEDULE.

•  Specify the correct date and time.

SCHEDULE does not function unless the date and time are specified.

•  Check regularly that the set date and time are correct.

Note:

•  Up to 8 SCHEDULE items can be registered.

•  Setting the SCHEDULE flashes the power LED alternately in red and

orange in standby mode.

•  A SCHEDULE that has a large number has precedence over that of a

small number when schedules overlap.

■ ADVANCED items (AV input)

Adjust the hue control.

Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may cause blur-
ring on an image.

Reduce block noise caused by digital compression.

Specify whether to perform 3-dimension Y/C separation.

If dot interference or cross-color is occurring in fast-motion scenes,

selecting “OFF” may improve the image quality.

1

Q

: SCHEDULE effective

-

: SCHEDULE not effective

2 POWER

ON

: Switches the monitor on at the specified time.

OFF : Switches the monitor off at the specified time and puts the

monitor in standby mode.

SCHEDULE

No.

POWER

DAY OF THE WEEK

TIME

INPUT

XXXX/XX/XX XXX  XX:XX:XX 

PC2 ANALOG

(2)

OK…[MENU]

1 0 2 4 x 7 6 8

V: 60 Hz    H: 48.4 kHz

(1)

(3)

(4)

(5)

MENU

3 DAY OF THE WEEK

Specifies the day of the week to execute the SCHEDULE.

ONLY ONCE:

Executes the SCHEDULE once on the specified day.

Specify the day of the week to execute the SCHEDULE.

Executes the SCHEDULE on the specified day of the week every
week. Specify the day of the week to execute the SCHEDULE.

Periodic setting such as “Monday through Friday” is also possible.

Executes the SCHEDULE every day regardless of the day of the
week.

4 TIME

Specifies the time to execute the SCHEDULE.
Set the time on a 24-hour basis.

5 INPUT

Specifies the input mode at power-on. When not specifying, the
screen at the previous power-off appears.
Input modes displayed on “PC1/AV1” depend on DVI SELECT set-
tings.

Input modes displayed on “PC3/AV2” depend on BNC SELECT set-
tings.