PN-465E (serv.man5) - Sharp Monitor User Guide / Operation Manual. Page 36

Read Sharp PN-465E (serv.man5) User Guide / Operation Manual online

34
E
Specifications
Product Specifications
Model 
PN-465E
LCD element 
46" wide (116.8 cm diagonal) ASV low-reflection black TFT LCD
Max. resolution 
(pixels)  1920 x 1080
Max. colours 
16.77 M colours (8 bits/colour)
Pixel pitch 
0.53025 mm (H) x 0.53025 mm (V)
Viewing angle  
176° right/left/up/down (contrast ratio ≥ 10)
Screen active area 
(mm)  1018.1 x 572.7
Computer input signal 
Digital (DVI 1.0 standard-compliant), Analogue RGB (0.7 Vp-p) [75 Ω]
 
Sync signal 
Horizontal/vertical separate (TTL: positive/negative), Sync-on-green, 
 
 
Composite sync (TTL: positive/negative)
Video colour system 
PAL, PAL-60, SECAM, NTSC (3.58 MHz), NTSC (4.43 MHz)
Plug and play  
VESA DDC2B
Power management 
VESA DPMS, DVI DMPM
Input terminals  
PC/AV 
Digital 
DVI-D 24 pin (HDCP compatible) x 1
 
 
PC 
Analogue 
Mini D-sub 15 pin, 3 rows x 1, BNC 
*1*2
 x 1
 
 
 
Audio 
3.5 mm mini stereo jack x 1
 
 
AV 
Composite video  BNC x 1
 
 
 
Component 
BNC (Y, Cb/Pb, Cr/Pr)
*1
 x 1
 
 
 
Audio 
RCA pin (L/R) x 1
 
 
Serial (RS-232C) 
 
D-sub 9 pin x 1
Output terminals  
PC/AV 
Digital 
DVI-D 24 pin x 1 
*3
 
 
Audio 
 
 
RCA pin (L/R) x 1
 
 
Serial (RS-232C) 
 
D-sub 9 pin x 1
 
 
Speaker 
 
 
7 W + 7 W [6 Ω]
Power requirement 
AC 100 V - 240 V, 50/60 Hz
Operating temperature 
0°C to 40°C
Operating humidity 
20% to 80% (no condensation)
Power consumption 
266 W (Input signal waiting mode: 7 W, Standby mode: 4 W)
Dimensions 
(mm)  Approx. 1,113 x 140 x 657 (excluding protrusions)
Weight  
(kg)  Approx. 35.5 (excluding the temporary stand)
*1 
Cannot be used simultaneously.
*2 
Does not support plug and play.
*3 
Connection is allowed with an HDCP-compatible device only. Does not support Repeater control function.
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for 
product imporovement without prior notice. The performance specification figures indicated are nominal values of production 
units. There may be some deviations from these values in individual units.
Page of 39
Display

Click on the first or last page to see other PN-465E (serv.man5) service manuals if exist.