LL-T2015 (serv.man2) - Sharp Monitor User Guide / Operation Manual. Page 15

The separately sold 2-input cable (model name:
NL-C03J) enables connection between the DVI-I
input terminal on the monitor and the two PCs.
(One analog and one digital connection.)

1. Connect the 2-input cable to the DVI-I input

terminal of the monitor.

2. Connect the accessory or commercially

available analog signal cable and the accessory
digital signal cable to the 2-input cable.

- When using commercially available analog

signal cable, both ends should be mini D-sub
15 pin.

3.Connect each signal cable to the computers.

- Paying attention to connector orientation,

firmly insert the signal cable into the PC, and
then tighten the screws at both sides.

Notes:
- When using the 2-input cable, set the

connecting input terminal [INPUT-2] to [2LINES]
under the MODE SELECT-2 Menu. (p.24, 27)

- The monitor connected to the 2-input cable by

analog connection may not be automatically
recognized and setup under Plug & Play.
Perform storage of setup information manually.
(p.33)

DVI-D24 pin

2-input cable

(purchased separately)

mini D-sub15 pin

DVI-I input terminal

(INPUT-2)

Digital RGB output terminal

Digital signal cable

Analog signal cable

Analog RGB
output terminal

Power terminal

Power cord

AC outlet