Read Sharp LL-T2010W (serv.man20) Service Manual online
LL-T2010W
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 4
■
■
■
■
TURNING THE POWER ON
1.
Press the monitor’s power button.
2.
Turn on the computer.
The power LED will be lit green, and the screen will display an
image.
Changing between input terminals
Use the INPUT button to switch between signal input terminals.
Notes: (when using an analog signal)
• If using the monitor for the first time or after having changed the
system settings during use, perform an automatic screen adjust-
ment.
ment.
• When connecting to a notebook, if the notebook computer’s screen
is set so that it is displaying at the same time, the MS-DOS screen
may not be able to display properly. In this case, change the set-
tings so that only the monitor is displaying.
tings so that only the monitor is displaying.
■
■
■
■
TURNING THE POWER OFF
1. Turn the computer off.
2. Press the monitor’s power button.
The Power LED will disappear.
If the monitor is not going to be used for a long period of time, be
sure to unplug it from the AC outlet.
Turn monitor on
Press power button
Turn on device to which
monitor is connected
monitor is connected
ON
INPUT-1
INPUT
Analog RGB input terminal
INPUT-2
<DIGITAL>
INPUT-2
<ANALOG>
DVI-I input terminal
(digital)
DVI-I input terminal
(analog)
Turn monitor on
Press power button
Turn off device to which
monitor is connected
monitor is connected
OFF
Click on the first or last page to see other LL-T2010W (serv.man20) service manuals if exist.