Read Sharp LL-T2010W (serv.man20) Service Manual online
LL-T2010W
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 3
Connect using a display cable (to be purchased separately)
• Using a display cable (to be purchased separately), it can be con-
nected to the computer’s (PC etc.) digital RGB output terminal or ana-
log RGB output terminal.
.
To connect to a digital RGB output terminal: Digital signal cable
(model name: NL-C01E)
.
To connect to an analog RGB output terminal: Analog signal cable
(model name: NL-C02E)
(model name: NL-C02E)
• For a digital signal input: It can be connected to a computer with a
DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and
which has UXGA output ability. Depending on the computer to be
connected, correct display may or may not be possible.
connected, correct display may or may not be possible.
• Be careful not to overly bend the cable or add extension cords as this
could lead to malfunction.
1.
Remove the cover.
2.
Connect the display cable (to be purchased separately) into the
DVI-I input terminal.
DVI-I input terminal.
3.
Replace the cover.
■
■
■
■
CONNECTING A USB DEVICE
This monitor can be used with hubs which use the USB standard (Rev.
1.1).
1.1).
Downstream (2 ports)
USB devices such as keyboard and mouse can be connected here. Up
to 100mA of power is able to be supplied per port. Devices requiring
more than 100mA cannot be connected.
Upstream (1 port)
USB compatible computers and self-powered hubs can be connected.
(Bus-powered hubs cannot be connected.)
Notes:
• If a USB cable is required, please use the one included.
• Before connecting, ensure that the shape of the USB cable con-
nector is correct.
• For information regarding the USB function (such as set-up) please
refer to the operation manual of the computer to be connected.
• Some computers, OS and other devices may not be able to be acti-
vated. To ascertain a certain device’s USB compatibility, please
contact the manufacturer of the device.
1. Remove the cover.
2. Connect the USB cable.
3. Replace the cover.
(Rear View)
Cover
To the computer's RGB
output terminal
output terminal
Display cable
(to be purchased
separately)
(to be purchased
separately)
DVI-I input terminal
(Rear View)
Cover
USB port:
Upstream (1 port)
Upstream (1 port)
USB port:
Downstream (2 ports)
Downstream (2 ports)
Click on the first or last page to see other LL-T2010W (serv.man20) service manuals if exist.