LL-T19D1 (serv.man8). Connecting the monitor and turning the monitor on and off - Sharp Monitor User Guide / Operation Manual. Page 2

1.Turn on the main power of the monitor.

- When switching the main power switch on and

off, always wait for an interval of at least 5
seconds. Rapid switching may result in
malfunction.

2.Press the monitor's POWER button.

The power LED will light up orange.

3.Turn on the computer.

When a signal is input from the computer, the
power LED lights up green, and the screen is
displayed. (After power is turned on, it may take a
little time until the screen is displayed.)
- If the input terminal to which the computer is

connected has not been selected, the screen
will not be displayed. If necessary, perform
input terminal switching. (p.13)

Notes:
- When using an analog signal, perform an

automatic screen adjustment under the following
conditions (p.16):
- Using the monitor for the first time.
- After having changed the system settings

during use.

- Depending on the computer or OS, it may be

necessary to use the computer to install monitor
set-up information (p.26).

- When connecting to a notebook, if the notebook

computer's screen is set so that it is displaying at
the same time, the MS-DOS screen may not be
able to display properly. In this case, change the
settings so that only the monitor is displaying.

Turn on the
computer power
supply.

Press power button.

Main power switch

Power terminal

Power cord

AC outlet

ON

T19D1_gb.p65

2/14/2003, 3:07 PM

12