Read Sharp LL-T18A1 Service Manual online
LL-T18A1
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
1-4. Changing between input terminals
Use the INPUT button to switch between signal input terminals.
1-5. Turning the power off
1.
Turn the computer off.
2.
Press the monitor's POWER button.
The Power LED will disappear.
If the monitor is not going to be used for a long period of time, be sure to
unplug it from the AC outlet.
1-6. Instructions for attaching a VESA compliant arm
An arm or stand based on the VESA standard (commercially available)
can be attached to the monitor.
Procurement of the arm or stand is at the customer's discretion.
Arms or stands able to be used
Attachments must satisfy the following.
• Compatible with the VESA standard
• Have a gap of 100 mm x 100 mm between the screw holes on the
section to be attached
• Not be likely to fall off or break off after being attached to the monitor.
How to attach the arm or stand
• Be careful not to overly bend the cable or add extension cords as this
could lead to malfunction.
• While following these instructions, please also refer to the installation
instructions in the operation manual included with the arm or stand.
1.
Ensure that both the monitor and computer are switched off.
2.
Remove the AC adapter and the signal cable.
3.
Remove the stand cover.
Pull the lower section of the stand cover upward.
4. Being careful not to damage the monitor, spread out a soft cloth and
lay the monitor on it display-side down.
5. Remove the four screws and then remove the stand from the moni-
tor.
Note:
• The stand is specially made for use with this monitor. Once having
removed the stand, never attempt to attach it to another device.
• Once having removed the screws, store them together with the
stand and if the stand is ever re-attached be sure to use the original
screws.
screws.
Using different screws could lead to a malfunction.
6. Attach the arm to the monitor with the four screws.
Note: The screws used to attach the arm should be M4 screws with a
length of 8 mm ~ 10 mm protruding from the surface to be
attached.
Using different screws could cause the monitor to fall off or to be
Using different screws could cause the monitor to fall off or to be
internally damaged.
7. Connect the AC adapter and the signal cable.
INPUT
INPUT
INPUT-2 (DIGITAL)
INPUT-1 (ANALOG)
Analog RGB input terminal
Digital RGB input terminal
Turn the
computer off
OFF
Press power button
Stand cover
Screw used to attach arm
Arm
Part of monitor to which arm is attached
8~10mm
Click on the first or last page to see other LL-T18A1 service manuals if exist.