Read Sharp LL-T18A1 Service Manual online
LL-T18A1
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
■
■
■
■
Product specifications
• Model name
LL-T18A1-H (Frosty gray)/LL-T18A1-B (Black)
• LCD display
46 cm measured diagonally
TFT LCD module
TFT LCD module
• Resolution (max.)
SXGA 1280 x 1024 pixels
• Displayable colors (max.)
16.77 million colors (8bit)
• Brightness (max.)
250cd/m
2
• Dot pitch
0.2805(H) x 0.2805(V) mm
• Contrast ratio
350 : 1
• Angle of visibility
Left-right 160°; Up-down 160° (contrast ratio
s
5)
• Screen display size
Horizontal 359 mm x Vertical 287.2 mm
• Video signal
Analog: Analog RGB (0.7Vp-p) [75
Ω
]
Digital: DVI standard based on 1.0
• Sync signal
Separate Sync (TTL level: +/-), Sync on Green, Composite Sync (TTL
level: +/-)
level: +/-)
• Expansion compensation
Digital scaling (Enlarges VGA/SVGA/XGA etc. to full screen size.)
• Plug & Play
VESA DDC1/DDC2B compatible
• Power management
VESA: based on DPMS
DVI: based on DMPM
DVI: based on DMPM
• Input signal terminal
Mini D-sub 15pin (3 row), DVI-D24pin
• Screen tilt
Upward 0° - 15°
• Screen swivel
90° from left through right (Turn table type)
• Power supply
AC100 - 240V, 50/60Hz
(Use special AC adapter, type NL-A61J of Sharp Corporation.)
(Use special AC adapter, type NL-A61J of Sharp Corporation.)
• Temperature of operating environment
5 - 35°C
• Power consumption
Maximum 48W (Standby state: 2.7W)
(Use special AC adapter.)
(Use special AC adapter.)
• Dimensions
Approx. 422(W) x 217(D) x 420(H) mm
• Weight
Approx. 7.0kg
Display area only: approx. 5.4kg
Display area only: approx. 5.4kg
■
■
■
■
Dimensions (Units: mm)
• Special AC adapter:
• Analog signal cable: Approx. 1.8m
• Digital signal cable, NL-C01E (purchased separately): Approx. 2.0m
422
68
372
420
267
217
Approx. H 110 mm x D 60 mm x H 30 mm
Approx. 1.8 m
Click on the first or last page to see other LL-T18A1 service manuals if exist.