Read Sharp LL-T1811W (serv.man2) Service Manual online
LL-T1811W
2 – 2
CONNECTING THE MONITOR TO A COMPUTER
(PC etc.)
(PC etc.)
Connect using this device's analogue signal cable
Connect this device's analogue signal cable to the computer (PC etc.).
When connecting, ensure that both the monitor and computer are
switched off.
switched off.
Be careful not to overly bend the cable or add extension cords as this
could lead to malfunction.
could lead to malfunction.
Note: If connecting to the Sun Ultra series, a conversion adapter
(purchased separately) may be required.
Connect using a display cable (to be purchased separately)
• Using a display cable (to be purchased separately), it can be con-
nected to the computer's (PC etc.) digital RGB output terminal or
analogue RGB output terminal.
• To connect to a digital RGB output terminal: Digital signal cable
(model name: NL-C01E)
• To connect to an analogue RGB output terminal: Analogue signal
cable (model name: NL-C02E)
• For a digital signal input: It can be connected to a computer with a
DVI-compatible output terminal (DVI-D24 pin or DVI-I29 pin) and
which has SXGA output ability. Depending on the computer to be
connected, correct display may or may not be possible.
• Be careful not to overly bend the cable or add extension cords as
this could lead to malfunction.
1. Remove
the
cover.
2.
Connect the display cable (to be purchased separately) into the
DVI-I input terminal.
3.
Replace the cover.
CONNECTING A USB DEVICE
This monitor can be used with hubs which use the USB standard
(Rev. 1.1).
(Rev. 1.1).
Downstream (2 ports)
USB devices such as keyboard and mouse can be connected here.
Up to 100mA of power is able to be supplied per port. Devices requir-
ing more than 100mA cannot be connected.
Upstream (1 port)
USB compatible computers and self-powered hubs can be connected.
(Bus-powered hubs cannot be connected.)
(Bus-powered hubs cannot be connected.)
Notes: • If a USB cable is required, please use the one included.
• Before connecting, ensure that the shape of the USB cable
connector is correct.
• For information regarding the USB function (such as set-up)
please refer to the operation manual of the computer to be
connected.
• Some computers, OS and other devices may not be able to
be activated. To ascertain a certain device's USB compatibil-
ity, please contact the manufacturer of the device.
1. Remove the cover.
2. Connect the USB cable.
3. Replace
the
cover.
Firmly insert the analog RGB output terminal
(mini D-sub 15 pin with 3 rows) then tighten the
screws each side.
(mini D-sub 15 pin with 3 rows) then tighten the
screws each side.
Analog signal cable
If connecting to a D-sub 15 pin 2 row Apple
Power Macintosh, attach a Macintosh conversion
adapter (to be purchased separately) to
the RGB signal cable.
Power Macintosh, attach a Macintosh conversion
adapter (to be purchased separately) to
the RGB signal cable.
Macintosh conversion adapter
Analog signal cable
After connecting the adapter,
tighten the screws on each side
to fix into place.
After connecting the adapter,
tighten the screws on each side
to fix into place.
(Rear View)
Cover
To the computer's
RGB output terminal
RGB output terminal
Display cable (to be
purchased separately)
purchased separately)
DVI-I input terminal
(Rear View)
Cover
USB port:
Upstream (1 port)
Upstream (1 port)
USB port:
Downstream (2 ports)
Downstream (2 ports)
Click on the first or last page to see other LL-T1811W (serv.man2) service manuals if exist.