Read Sharp LL-T1811W (serv.man12) User Guide / Operation Manual online
24
Adjusting the screen display (when using a digital signal)
MODE SELECT Menu
Notes:
-
-
Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.
even if menu options can be selected, the display
may not change.
-
To choose a menu option:
SELECT button
-
When adjustment complete:MENU button
OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the
left and right. ( buttons)
The position of the OSD display can be moved to the
left and right. ( buttons)
OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up
and down. ( buttons)
The position of the OSD display can be moved up
and down. ( buttons)
EXPAND (Screen expansion)
For display modes of less than 1280 X 1024 pixels,
the display can be expanded if desired. ( but-
tons)
For display modes of less than 1280 X 1024 pixels,
the display can be expanded if desired. ( but-
tons)
OFF: Expansion off
ON1: Using the fixed aspect ratio,
ON1: Using the fixed aspect ratio,
the entire screen is enlarged.
ON2: The entire screen is enlarged.
Note:
-
-
If a resolution of 1280 X 1024 pixels cannot be
achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not
a malfunction.)
achieved even after expansion is attempted, the
screen's perimeter will display black. (This is not
a malfunction.)
SCALING (Level of scaling)
If [EXPAND] is set on [ON1] or [ON2], the sharpness
of the image can be adjusted. ( buttons)
If [EXPAND] is set on [ON1] or [ON2], the sharpness
of the image can be adjusted. ( buttons)
Note:
-
-
If [EXPAND] is set on [OFF], [SCALING] cannot
be adjusted.
be adjusted.
COLOR MODE
If this is set on [STD], the original color scheme of
the LCD monitor will be displayed. If this is set on
[sRGB], the colors of will be corrected according to
the computer image. ( buttons)
If this is set on [STD], the original color scheme of
the LCD monitor will be displayed. If this is set on
[sRGB], the colors of will be corrected according to
the computer image. ( buttons)
Note:
-
-
To set [COLOR MODE] to [sRGB], set the
[WHITE BALANCE] to [STD].
[WHITE BALANCE] to [STD].
Click on the first or last page to see other LL-T1811W (serv.man12) service manuals if exist.