LL-T1811W (serv.man12). LLT1811W - Sharp Monitor User Guide / Operation Manual. Page 22

Depending on the resolution of the input signal,
even if menu options can be selected, the display
may not change.

To choose a menu option:

SELECT button

When adjustment complete: MENU button

OSD H-POSITION (OSD horizontal position)
The position of the OSD display can be moved to the
left and right. (    buttons)

OSD V-POSITION (OSD vertical position)
The position of the OSD display can be moved up
and down. (    buttons)

INPUT (Input mode)
The input mode can be set. (    buttons)

VESA: VESA mode
MAC:

Power Macintosh mode

400 LINES (degree of resolution)
You can specify the horizontal resolution of a 400-
line screen when using US text, etc.
(    buttons)

640: 640 X 400 dot mode
720: 720 X 400 dot mode (US text etc.)

As the resolution input for other than 400 lines is
done automatically, there is no need to set it.

EXPAND (Screen expansion)
For display modes of less than 1280 X 1024 pixels,
the display can be expanded if desired. (    but-
tons)

OFF: Expansion off
ON1: Using the fixed aspect ratio,

the entire screen is enlarged.

ON2: The entire screen is enlarged.

If a resolution of 1280 X 1024 pixels cannot be
achieved even after expansion is attempted, the
screen’s perimeter will display black. (This is not
a malfunction.)

SCALING (Level of scaling)
If [EXPAND] is set on [ON1] or [ON2], the sharpness
of the image can be adjusted.  (    buttons)

If [EXPAND] is set on [OFF], [SCALING] cannot
be adjusted.

COLOR MODE
If this is set on [STD], the original color scheme of
the LCD monitor will be displayed. If this is set on
[sRGB], the colors of will be corrected according to
the computer image.  (    buttons)

To set [COLOR MODE] to [sRGB], set the
[WHITE BALANCE] to [STD].