LL-T1803 (serv.man8). Complete - Sharp Monitor Service Manual (repair manual). Page 4

LL-T1803-E/P

OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION

1 – 3

■

■

■

■    

This monitor supports the VESA DDC (Display Data Channel) standard.

DDC is a signal standard for carrying out Plug & Play functions on the

monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is

DDC compliant and if it is set so that it can detect the Plug & Play mon-

itor.
There are many varieties of DDC due to the differences between sys-

tems. This monitor works with DDC1 and DDC2B.

■

■

■

■    

Caution: • Pressure from hands on the LCD panel could cause damage.

• Be careful not to allow your fingers to be pinched.

Press down on the stand and lift up the top section of the monitor.

1. Remove the AC adapter and the RGB signal cable.

2. If carrying out adjustments to the monitor, place it upright.

3. While pressing the rear lock disable button (1), gently fold back the

monitor (2).

Adjust to an easy to view angle.

1.

INPUT button

To switch between the signal’s input terminals.
(Analog signal input terminal

0

DVI-D input ter-

minal)

2.

MENU button

This button is used to pop-up, select and close
the OSD (On Screen Display) Menu.

3.

SELECT button This button is used to select menu options when

the OSD Menu is displayed.

4.

e d

buttons

When the OSD Menu is displayed:
These buttons are used to increase or decrease
the value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight
brightness.

5.

Power LED

This LED is lit green when in use and orange
when in power-saving mode.

6.

Power button

7.

Power terminal

8.

Analog signal
 input terminal

Use this when connecting to the computer’s
analog RGB output terminal.

9.

DVI-D input
terminal

Use this when connecting to the computer’s dig-
ital RGB output terminal.
It can be connected to a computer with a DVI-
compatible output terminal (DVI-D24 pin or DVI-
I 29 pin) and which has SXGA output ability.
(Depending on the computer to be connected,
correct display may or may not be possible.)
In order to connect, it is necessary to purchase
a Digital signal cable. (Model name: NL-C01E)

10. Security lock

anchor

By connecting a security lock (purchased sepa-
rately) to the security lock anchor, the monitor is
fixed so that it cannot be transported.
The security slot works in conjunction with
Kensington Micro Saver Security Systems.

11. Ventilation

openings

Note:Never block the ventilation openings as
this may lead to overheating inside the monitor
and result in malfunction.

6

5

4

3

2

1

7

8

11

11

11

10

9

2

1

45

45

15