LL-T17D3 (serv.man13) - Sharp Monitor User Guide / Operation Manual. Page 11

- When connecting, ensure that both the monitor

and computer are switched off.

- Be careful not to overly bend the cable or add

extension cords as this could lead to a
malfunction.

- Paying attention to connector direction, firmly

insert the signal cable to terminal, and then
tighten the screws at both sides.

If connecting to a D-sub 15 pin 2 row Apple Power
Macintosh, attach a Macintosh conversion adapter
(commercially available) to the analog signal cable.

Analog RGB terminal
(Mini D-Sub 15 pin, 3 row)

Analog signal cable

Macintosh conversion adapter

The separately sold display cable enables connec-
tion between the DVI-I input terminal on the display
and the digital or analog RGB output terminal of
the computer.
When connecting to a digital RGB output terminal:
- Use a digital signal cable (model name: NL-

C01E)

- For digital RGB connection, the monitor has an

input for connecting to a computer with a DVI-
compatible output connector (DVI-D 24 pin or
DVI-I 29 pin) and SXGA output capability.
(Depending on the type of computer to be
connected, the display may not work correctly.)

When connecting to an analog RGB output terminal:
- Use an analog signal cable (model name: NL-

C02E).

- Paying attention to connector direction, firmly

insert the signal cable to terminal, and then
tighten the screws at both sides.

Set the monitor as follows when establishing a
digital connection with a Power Mac using an ADC-
DVI adapter made by Belkin. (Operation has been
checked with the Power Mac G4 M7627J/A)
- Perform settings with the Power Mac power

supply off.

1.Connect the power cord.
2.Press the   button and   button simultaneously,

and while doing this press the POWER button
(i.e. turn the power on).

O K . . . [ M E N U ]

MAC DIGITAL

INPUT-2

OFF

ON

3.Set to "ON" with the     buttons.

- Do not set to [ON] if you are not using a Belkin

ADC-DVI adapter, as this may result in
incorrect display.

4. Press the MENU button.

This completes setting.

Display cable
(purchased separately)

RGB output terminal

DVI-I input terminal

02_LL-T17D3_gb.p65

11/29/2002, 5:14 PM

11