Read Sharp LL-T17A4 (serv.man10) User Guide / Operation Manual online
15
English
Deut
sch
Français
Italiano
Español
English
Adjusting the speaker volume
1. Without the OSD Menu being displayed, press
the or the button.
2. Check that [VOLUME] is selected.
If it is not selected, press the
/ MODE button
and select [VOLUME].
3. Adjust by pressing the button (decrease) or
button (increase).
Note:
- On Screen display for adjustment disappears
several seconds after the last operation.
Adjusting the screen display and speaker volume
Setting display mode
Color tone or brightness can be changed with one
command.
command.
STD
Displays image with the color tone results from
original scheme of liquid crystal panel.
original scheme of liquid crystal panel.
OFFICE
Display brightness is lowered. (This mode saves
power.)
power.)
sRGB
sRGB is international standard of color
representation specified by IEC (International
Electrotechnical Commission).
Color conversion is made in taking account of
liquid crystal's characteristics and represents
color tone close to its original image.
representation specified by IEC (International
Electrotechnical Commission).
Color conversion is made in taking account of
liquid crystal's characteristics and represents
color tone close to its original image.
VIVID
Displays an image with dynamic and vivid
primary colors.
primary colors.
- If [DISPLAY MODE] is set to [sRGB] or [VIVID],
[WHITE BALANCE] is set to [STD].
How to set
Press the
/ MODE button when the OSD Menu is
not displayed.
Each time the button is pressed the next menu item
appears. (STD
Each time the button is pressed the next menu item
appears. (STD
→
OFFICE
→
sRGB
→
VIVID
→
STD)
On Screen display for adjustment disappears
several seconds after the last operation.
On Screen display for adjustment disappears
several seconds after the last operation.
Click on the first or last page to see other LL-T17A4 (serv.man10) service manuals if exist.