LL-T1620 (serv.man20) - Sharp Monitor User Guide / Operation Manual. Page 19

INPUT-1

ANALOG

1024 x 768

V : 60Hz

H : 48.4kHz

GAIN CONTROL

MANUAL

AUTO

BLACK LEVEL
CONTRAST

50
18

MANUAL: Individual menu options are manually

adjusted.

AUTO:

Every menu option is automatically
adjusted using the Auto Gain Control*
function.

- Press the   button to select [AUTO].
- To choose a menu option: SELECT button
- To go to the next menu:

MENU button

* Auto Gain Control function
- The Auto Gain Control adjusts contrast and black

level based on the brightest color of the image
displayed.Unless an Adjustment Pattern is used,
automatic adjustment may not be possible. In
such a case, either use an Adjustment Pattern,
or adjust manually.

- If the signal coming from the computer is

composite sync or sync on green, automatic
adjustment cannot be performed. Please perform
manual adjustment instead.

BLACK LEVEL
Total screen brightness can be adjusted while

watching the color pattern. (    buttons)

CONTRAST
While watching the color pattern, adjustments can
be made so that all graduations appear.

(    buttons)

Color pattern

COLOR CONTROL

sRGB

INPUT-1

ANALOG

1024 x 768

V : 60Hz

H : 48.4kHz

STD

VIVID

COLOR MODE

WHITE BALANCE
HUE
SATURATION

0
0

Notes:
- To choose a menu option: SELECT button
- To go to the next menu:

MENU button

COLOR MODE
Color tone can be set as below.

sRGB : sRGB is international standard of color

representation specified by IEC
(International Electrotechnical Commis-
sion). Color conversion is made in
taking account of liquid crystal’s
characteristics and represents color
tone close to it original image.

STD :

Displays image with the color tone
results from original scheme of liquid
crystal panel.

VIVID : Displays an image with dynamic and

VIVID primary colors.

- If [sRGB] or [VIVID] has been selected, items

subsequent to [WHITE BALANCE] cannot be set.

Subsequent items can be set when the [COLOR
MODE] is [STD].

After selecting [WHITE BALANCE], press the 
button and display the adjustment menu.

WHITE BALANCE

R-CONTRAST
G-CONTRAST
B-CONTRAST

COOL

WARM

USER

STD

OK    [ MENU ]

Notes:
- On settings other than [STD] not all graduations

can be displayed. To display all graduations, set
to [STD].

- Use the     buttons to select [COOL], [·], [STD],

[·], [WARM] or [USER].

- Selecting USER will display the setting values for

[R-CONTRAST], [G-CONTRAST] and [B-
CONTRAST], in order to make fine adjustments.

- Use the SELECT button to select

[R-CONTRAST], [G-CONTRAST] and
[B-CONTRAST].

- When adjustment complete: MENU button