Read Sharp LL-T15G4 Service Manual online
LL-T15G4-H/LL-T15G4-B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
■
Connect the accessory audio cable
When the accessory audio cable is connected to the audio output terminal
of the computer, the sound of the connected computer is output from the
of the computer, the sound of the connected computer is output from the
monitor speakers. You can also use the headphone jack of the display.
1-2. CONNECTION OF HEADPHONES
(COMMERCIALLY AVAILABLE)
Headphones (commercially available) can be connected.
Note: When the headphones are connected, no sound can be heard
from the monitor speakers.
1-3.
CONNECTING THE MONITOR TO A POWER SOURCE
1-4. TURNING THE POWER ON
1. Press the monitor's [power] button.
2.
Turn on the computer.
The power LED will be lit green, and the screen will display an image.
• If the input terminal to which the computer is connected has not
been selected, the screen will not be displayed. If necessary, per-
form input terminal switching.
Note:
• When using an analog signal, perform an automatic screen adjust-
ment under the following conditions :
• Using the monitor for the first time.
• After having changed the system settings during use.
• Depending on the type of computer or OS, you may need to install
the monitor set-up information on your system.
• When connecting to a notebook, if the notebook computer's screen is set
to display at the same time, the MS-DOS screen may not display prop-
erly. In this case, change the setting to display only the LCD monitor.
1-5. CHANGING BETWEEN INPUT TERMINALS
Use the [INPUT] button to switch between signal input terminals.
Note: When there is no input signal, [NO SIGNAL] is displayed.
1-6. TURNING THE POWER OFF
1. Turn the computer off.
2. Press the monitor's power button.
The power LED will disappear.
If the monitor is not going to be used for a long period of time, be sure to
unplug it from the AC outlet.
Audio cable
Audio output terminal
Audio input terminal
Headphones
Headphone terminal
Power terminal
AC outlet
Power cord
[Power] botton
Power LED
Analog RGB input
terminal
DVI-D input
terminal
INPUT
INPUT
<ANALOG>
INPUT
<ANALOG>
[Power] button
Power LED
Click on the first or last page to see other LL-T15G4 service manuals if exist.