Read Sharp LL-T15G3 (serv.man14) Service Manual online
LL-T15G3
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 2
■
■
■
■
THE ANALOG RGB INPUT CONNECTOR PIN
■
■
■
■
POWER MANAGEMENT
The monitor is based on VESA DPMS (Display Power Management Sig-
naling).
To activate the monitor's Power Management function, both the video
card and the computer must conform to the VESA DPMS standard.
card and the computer must conform to the VESA DPMS standard.
■
■
■
■
DDC (PLUG & PLAY)
This monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for carrying out Plug & Play functions on the
monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is DDC
between the monitor and PC. You can use this function if your PC is DDC
compliant and if it is set so that it can detect the Plug & Play monitor.
There are many varieties of DDC due to the differences between sys-
tems. This monitor works with DDC1 and DDC2B.
tems. This monitor works with DDC1 and DDC2B.
2. PRODUCT DESCRIPTION
No.
Function
No.
Function
1
Red video signal input
9
+5V
2
Green video signal input
10
GND
3
Blue video signal input
11
N.C.
4
GND
12
DDC data
5
GND
13
For Hsync signal input
6
For red video signal GND
14
For Vsync signal input
7
For green video signal GND
15
DDC clock
8
For blue video signal GND
DPMS mode
Screen
Power
consumption
H-sync
V-sync
ON
Display on
33W
Yes
Yes
STANDBY
Display off
2W
No
Yes
SUSPEND
Yes
No
OFF
No
No
1
2
3
4
5
11
12
13
14
15
6
7
8
9
10
(Mini D-sub connector with 15 pins)
1. MENU button:
This button is used to pop-up, select and close
the OSD (On Screen Display) Menu.
the OSD (On Screen Display) Menu.
2.
c
/MODE button:
When the OSD Menu is displayed:
This button is used to select menu options.
When the OSD Menu is not displayed:
This button is used to set COLOR MODE.
3.
e d
buttons:
When the OSD Menu is displayed:
These buttons are used to increase
or decrease the value of a selected option.
or decrease the value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight
brightness.
4. Power button:
Pressing this button turns the power on. (After
turning the power on, it may take a little time
before the screen displays.)
Press the button again to turn the power off.
Press the button again to turn the power off.
5. Power LED:
This LED is lit green when in use and orange
when in power-saving mode.
6. Power terminal:
7. Analog RGB input terminal:
The analog signal cable is connected here.The
analog signal cable included should be used.
analog signal cable included should be used.
8. Security lock anchor: By connecting a security lock (commercially
available) to the security lock anchor, the mon-
itor is fixed so that it cannot be transported.
itor is fixed so that it cannot be transported.
The security slot works in conjunction with
Kensington Micro Saver Security Systems.
9. Ventilation openings: Note: Never block the ventilation openings as
this may lead to overheating inside the monitor
and result in malfunction.
1
2
3
4
5
6
7
8
9
Click on the first or last page to see other LL-T15G3 (serv.man14) service manuals if exist.