LL-T15G3 (serv.man14). Complete - Sharp Monitor Service Manual (repair manual)

ll-t15g3 (serv.man14) service manual
Model
LL-T15G3 (serv.man14)
Pages
24
Size
1.54 MB
Type
PDF
Document
Service Manual
Brand
Device
Monitor / Complete
File
ll-t15g3-sm14.pdf
Date

Read Sharp LL-T15G3 (serv.man14) Service Manual online

CODE : 00Z
q
SERVICE MANUAL
CONTENTS
Parts marked with "
!
" are important for maintaining the safety of the set. Be sure to replace these parts with specified
ones for maintaining the safety and performance of the set.
SHARP CORPORATION
LLT15G3SME
LCD MONITOR
 MODEL
LL-T15G3
      
(E, U version)
CHAPTER 1. OUTLINE OF THE PRODUCT, 
NOMENCLATURE AND FUNCTION . . . . . . . . . . . . . . . . . .1 - 1
CHAPTER 2. CONNECTION, ADJUSTMENT, 
OPERATION, AND FUNCTIONS. . . . . . . . . . . . . . . . . . . . .2 - 1
CHAPTER 3. DISASSEMBLY AND ASSEMBLY . . . . . . . . . . . . . . . . . . . .3 - 1
CHAPTER 4. TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 - 1
CHAPTER 5. CONNECTOR SIGNAL TABLE • 
CIRCUIT DIAGRAM • PWB LAYOUT  . . . . . . . . . . . . . . . . .5 - 1
APPENDIX : IC DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 - 1
LL-T15G3
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 1
CHAPTER 1. OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1. SPECIFICATIONS
■ 
■ 
■ 
■ 
PRODUCT SPECIFICATIONS
• LCD display
38 cm measured diagonally
TFT LCD module
• Resolution (max.)
XGA 1024 x 768 pixels
• Displayable colors (max.)
Approx.16.19 million colors (6bit + FRC)
• Brightness (max.)
260cd/m
2
•  Dot pitch
0.297 (H) x 0.297 (V) mm
•  Contrast ratio
350:1
•  Angle of visibility
Left-right 160°; Up-down 150° (contrast ratio 
u
 5)
•  Screen display size
Horizontal 304.1 mm x Vertical 228.1 mm
• Video signal
Analog RGB (0.7Vp-p) [75
]
• Sync signal
Separate Sync (TTL level: +/-), Sync on Green, 
Composite Sync (TTL level: +/-)
• Expansion compensation
Digital screening (Enlargement VGA/SVGA etc. to full screen size.)
•  Plug & Play
VESA DDC1/DDC2B compatible
• Power management
VESA: based on DPMS
• Input signal terminal
Mini D-sub 15 pin (3 row)
• Screen tilt
Upward approx.0 - 25°; downward approx.0 - 5°
• Power supply
AC100 - 240V, 50/60Hz
•  Temperature of operating environment
5 - 35°C
• Power consumption
Maximum 33W (Standby state: 2W)
• Dimensions
338 (W) x 145 (D) x 313 (H) mm
• Weight
Approx. 3.8kg (approx. 3.2kg excluding stand)
(Excluding analog signal cable.)
■ 
■ 
■ 
■ 
DIMENSIONS (UNITS: MM)
Analog signal cable: Approx. 1.8m
■ 
■ 
■ 
■ 
SIGNAL TIMINGS
•  Recommended resolution is 1024 x 768.
•  All are compliant only with non-interlaced.
•  Frequencies for Power Macintosh are reference values.
•  If the monitor is receiving timing signals that are not compatible, [OUT
OF TIMING] will appear.
Follow your computer's instruction manual to set the timing so that it
is compatible with the monitor.
•  If the monitor is not receiving any signal (synch signal), [NO SIGNAL]
will appear.
Display mode
Hsync
Vsync
Dot frequency
VESA
640 x 480
31.5kHz
60Hz
25.175MHz
37.9kHz
72Hz
31.5MHz
37.5kHz
75Hz
31.5MHz
800 x 600
35.1kHz
56Hz
36.0MHz
37.9kHz
60Hz
40.0MHz
48.1kHz
72Hz
50.0MHz
46.9kHz
75Hz
49.5MHz
1024 x 768
48.4kHz
60Hz
65.0MHz
56.5kHz
70Hz
75.0MHz
60.0kHz
75Hz
78.75MHz
US text
720 x 400
31.5kHz
70Hz
28.3MHz
Power 
Macintosh
series
640 x 480
35.0kHz
66.7Hz
30.2MHz
832 x 624
49.7kHz
74.6Hz
57.3MHz
1024 x 768
60.2kHz
75Hz
80.0MHz
338
313
275
63
203
145
LL-T15G3
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 2
■ 
■ 
■ 
■ 
THE ANALOG RGB INPUT CONNECTOR PIN
■ 
■ 
■ 
■ 
POWER MANAGEMENT
The monitor is based on VESA DPMS (Display Power Management Sig-
naling).
To activate the monitor's Power Management function, both the video
card and the computer must conform to the VESA DPMS standard.
■ 
■ 
■ 
■ 
DDC (PLUG & PLAY)
This monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for carrying out Plug & Play functions on the
monitor or PC. It transfers information such as degree of resolution
between the monitor and PC. You can use this function if your PC is DDC
compliant and if it is set so that it can detect the Plug & Play monitor.
There are many varieties of DDC due to the differences between sys-
tems. This monitor works with DDC1 and DDC2B.
2. PRODUCT DESCRIPTION
No.
Function
No.
Function
1
Red video signal input
9
+5V
2
Green video signal input
10
GND
3
Blue video signal input
11
N.C.
4
GND
12
DDC data
5
GND
13
For Hsync signal input
6
For red video signal GND
14
For Vsync signal input
7
For green video signal GND
15
DDC clock
8
For blue video signal GND
DPMS mode
Screen
Power
consumption
H-sync
V-sync
ON
Display on
33W
Yes
Yes
STANDBY
Display off
2W
No
Yes
SUSPEND
Yes
No
OFF
No
No
1
2
3
4
5
11
12
13
14
15
6
7
8
9
10
(Mini D-sub connector with 15 pins)
1. MENU button:
This button is used to pop-up, select and close
the OSD (On Screen Display) Menu.
2. 
c
/MODE button:
When the OSD Menu is displayed:
This button is used to select menu options.
When the OSD Menu is not displayed: 
This button is used to set COLOR MODE.
3. 
e d 
buttons:
When the OSD Menu is displayed:
These buttons are used to increase 
or decrease the value of a selected option.
When the OSD Menu is not displayed:
These buttons are used to adjust backlight
brightness.
4. Power button:
Pressing this button turns the power on. (After
turning the power on, it may take a little time
before the screen displays.)
Press the button again to turn the power off.
5. Power LED:
This LED is lit green when in use and orange
when in power-saving mode.
6. Power terminal:
7. Analog RGB input terminal:
The analog signal cable is connected here.The
analog signal cable included should be used.
8. Security lock anchor: By connecting a security lock (commercially
available) to the security lock anchor, the mon-
itor is fixed so that it cannot be transported.
The security slot works in conjunction with
Kensington Micro Saver Security Systems.
9. Ventilation openings: Note: Never block the ventilation openings as
this may lead to overheating inside the monitor
and result in malfunction.
1
2
3
4
5
6
7
8
9
LL-T15G3
OUTLINE OF THE PRODUCT, NOMENCLATURE AND FUNCTION
1 – 3
■ 
■ 
■ 
■ 
STANDING UP AND ADJUSTING THE MONITOR
Caution:
•  Pressure from hands on the LCD panel could cause damage.
•  Be careful not to allow your fingers to be pinched.
1) Standing up the monitor
1.
Press down on the stand and lift up the top section of the monitor.
•  When raising the display section, movement becomes harder in
the middle of travel.
Continue raising by applying more force at that point.
• Raise the display section until it stops. (when titled forward
approx. 5°)
2.
Adjust to an easy to view angle.
2) Angle adjustment
Press down on the stand and adjust it to a suitable viewing angle.
• Do not use the monitor when tilted back beyond approximately 25°.
The monitor may fall over leading to injury or malfunction.
3) Folding up the monitor
1. Remove the cable.
2. Press down on the stand and gently fold back the monitor.
approx. 5
approx. 5
approx. 25
Prohibited range
approx. 5
approx. 25
Page of 24
Display

Download Sharp LL-T15G3 (serv.man14) Service Manual (Repair Manual)

Here you can read online and download Sharp LL-T15G3 (serv.man14) Service Manual in PDF. LL-T15G3 (serv.man14) service manual will guide through the process and help you recover, restore, fix, disassemble and repair Sharp LL-T15G3 (serv.man14) Monitor. Information contained in service manuals typically includes schematics / circuit diagrams, wiring diagrams, block diagrams, printed wiring boards, exploded views, parts list, disassembly / assembly, pcb.