LL-T1511A (serv.man3). Connection, adjustment, operation, and functions. - Sharp Monitor Service Manual (repair manual). Page 2

3. Plug the USB device into the monitor’s USB downstream port.

Notes:

•

Before connecting, ensure that the shape of the USB cable
connector is correct.

•

For information regarding the USB function (such as set-up)
please refer to the operation manual of the computer to be
connected.

•

Some computers, OS and other devices may not be able to be
activated. To ascertain a certain device’s USB compatibility,
please contact the manufacturer of the device.

USB specifications

Standard: Based on USB standard (Rev. 1.1), bus-powered hub
Downstream port power supply: 100 mA per port maximum

1. Turn on the monitor’s main switch.

2. Turn on the computer.

3. Press the monitor’s power button. The power LED will be lit green,

and the screen will display an image.

Note: When setting up this monitor for the first time or after having

changed an aspect of the current system, perform an automat-
ic screen adjustment before use.

Installing set-up information

Depending on the computer or OS, it may be necessary to use the
computer to operate the installation of monitor set-up information etc.
If so, follow the steps below to install the monitor set-up information. 

Notes:

•

Depending on the computer type, command names and meth-
ods may differ. Please follow the computer’s own operation
manual while reading this.

•

This explanation assumes that the floppy disk drive is "A drive".
If the floppy disk drive of your computer is not "A drive", please
read the below substituting the floppy disk drive you are using
in place of "A drive" or "A ".

Installing monitor set-up information into Windows95. 
This explanation assumes that the floppy disk drive is "A drive".

1.

Place the Monitor Settings Adjustment Disk (provided) into the
computer’s A drive.

2.

Click on the [Start] button. From [Settings], choose [Control
Panel].

3.

Double click on [Display].

4.

Click on [Settings], [Advanced Properties], and [Monitor], then
[Change]. 

5.

Click on [Have Disk], confirm that [Copy manufacturer’s files
from:] is [A:] then click [OK].

6.

Confirm that the monitor details are selected, and click [OK].

7.

Check that the monitor details are displayed, then click [Apply].

8.

Click [OK], and close the window.

9.

Remove the Monitor Settings Adjustment Disk from the A drive.

Installing monitor set-up information into Windows98.
If the "Add New Hardware Wizard" has appeared:
(This explanation assumes that the floppy disk drive is "A drive")

1.

Place the Monitor Settings Adjustment Disk (provided) into the
computer’s A drive.

2.

Click [Next].

3.

Check [Display a list of all the drivers in a specific location, so
you can select the driver you want.], then click [Next].

4.

When [Models] is displayed, click on [Have Disk], confirm that
[Copy manufacturer’s files from:] is [A:], and click [OK].

5.

Confirm that the monitor details are selected, then click [Next],
[Next], and [Finish]. If the "Add New Hardware Wizard" appears,
repeat the installation commands beginning from 2 above.

6.

Remove the Monitor Settings Adjustment Disk from the A drive.

If the "Add New Hardware Wizard" has not appeared:
(This explanation assumes that the floppy disk drive is "A drive")

1.

Place the Monitor Settings Adjustment Disk in the computer’s A
drive.

2.

Click on the [Start] button. From [Settings], choose [Control
Panel].

3.

Double click on [Display].

4.

Click on [Settings], [Advanced] and [Monitor].

5.

In [Options], check [Automatically detect Plug & Play monitors]
and click on [Change].

6.

Click [Next].

7.

Click on [Display a list of all the drivers in a specific location, so

USB downstream port

Main power switch

Power LED

Power button