Read Sharp LL-191A Service Manual online
LL-191A-W/B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
■
Turning the power on
1.
Turn on the main power of the monitor.
• When switching the main power switch on and off, always wait for an
interval of at least 5 seconds. Rapid switching may result in malfunction.
2.
Press the monitor's power button.
3.
Turn on the computer.
When a signal is input from the computer, the power LED lights up
green, and the screen is displayed. (After power is turned on, it may
green, and the screen is displayed. (After power is turned on, it may
take a little time until the screen is displayed.)
Notes:
•
If using the monitor for the first time or after having changed the sys-
tem settings during use, perform an automatic screen adjustment.
•
Depending on the type of computer or OS, you may need to install
the monitor set-up information on your system.
the monitor set-up information on your system.
•
When connecting to a notebook, if the notebook computer's screen is
set to display at the same time, the MS-DOS screen may not display
properly. In this case, change the setting to display only the LCD
monitor.
monitor.
■
Turning the power off
1.
Turn the computer off.
2.
Press the monitor's power button.
The power LED will disappear.
If the monitor will not be used for a long time, turn off the main power
switch of the monitor, and remove the power plug from the outlet.
switch of the monitor, and remove the power plug from the outlet.
2. INSTRUCTIONS FOR ATTACHING
AVESA-COMPLIANT ARM
The following stand or arm can be attached to the monitor.
• Stand (sold separately)
• VESA-compatible arm (commercially available)
■
Arms or stands able to be used
Attachments must satisfy the following.
• Compatible with the VESA standard.
• Have a gap of 100 mm x 100 mm between the screw holes on the
section to be attached.
• Not be likely to fall off or break off after being attached to the monitor.
■
How to attach the arm or stand
• Be careful not to over bend the cable or add extension cords as this
could lead to malfunction.
• While following these instructions, please also refer to the installation
instructions in the operation manual included with the arm or stand.
Caution:
• Be careful not to get your fingers pinched between the display and
stand nor to let the stand drop. These could lead to injury.
1. Remove the cables.
2. Spread out a soft cloth on a suitable horizontal surface.
3. Being careful not to damage the monitor, gently lay the monitor on it
display-side down.
• For the LL-171G, extend the stand as long as possible and lock it
before positioning the monitor.
4.
Remove the four screws and then remove the stand from the monitor.
Notes:
• The stand is specially made for use with this monitor. Once
having removed the stand, never attempt to attach it to
another device.
• Once having removed the screws, store them together with the
stand and if the stand is ever re-attached be sure to use the orig-
inal screws.
inal screws.
Using different screws could lead to a malfunction.
Main power switch
Press power button.
Turn on the
computer power
supply.
computer power
supply.
ON
Turn the computer
off.
Press power button.
OFF
Model name:
NL-S02-H (Ivory)
NL-S02-B (Black)
Click on the first or last page to see other LL-191A service manuals if exist.