Read Sharp LL-191A Service Manual online
LL-191A-W/B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 1
CHAPTER 2. CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
1. CONNECTING THE MONITOR AND TURNING THE MONITOR ON AND OFF
1-1. CONNECTING THE MONITOR TO A COMPUTER
Connect the accessory analog signal cable to the analog RGB output
terminal of the computer.
• Paying attention to connector direction, firmly insert the signal cable
vertically into the connector, and then tighten the screws at both
sides.
sides.
If connecting to a D-sub15 pin 2 row Apple Power Macintosh, attach a
Macintosh conversion adapter (commercially available) to the analog
signal cable.
Note:
• If connecting to the Sun Ultra series, a conversion adapter (com-
mercially available) may be required.
■
Connect the accessory audio cable
When the accessory audio cable is connected to the audio output termi-
nal of the computer, the sound of the connected computer is output
from the monitor speakers. You can also use the headphone jack of the
from the monitor speakers. You can also use the headphone jack of the
display.
■
Connection of headphones (commercially available)
Headphones (commercially available) can be connected.
Note:
• When the headphones are connected, no sound can be heard from
the monitor speakers.
• Use headphones with a cable less than 3 m in length.
■
Connecting the monitor to a power source
Analog RGB terminal
(Mini D-sub 15 pin, 3 row)
(Mini D-sub 15 pin, 3 row)
Analog RGB terminal
(Mini D-sub 15 pin, 3 row)
(Mini D-sub 15 pin, 3 row)
Analog signal cable
Macintosh conversion adapter
Audio input terminal
Audio output terminal
Audio cable
Headphone terminal
Headphones
Power terminal
Power cord
AC outlet
Click on the first or last page to see other LL-191A service manuals if exist.