Read Sharp LL-172G Service Manual online
LL-172A-W/B/LL-172G-W/B
CONNECTION, ADJUSTMENT, OPERATION, AND FUNCTIONS
2 – 2
■
When connecting using a separately sold 2-input cable [LL-172G]
The separately sold 2-input cable (model name: NL-C03J) enables con-
nection between the DVI-I input terminal on the monitor and the two
nection between the DVI-I input terminal on the monitor and the two
computers. (One analog and one digital connection.)
1.
Connect the 2-input cable to the DVI-I input terminal of the monitor.
2.
Connect the accessory or commercially available analog signal
cable and the accessory digital signal cable to the 2-input cable.
• When using commercially available analog signal cable, both
ends should be mini D-sub 15 pin.
3.
Connect each signal cable to the computers.
• Paying attention to connector direction, firmly insert the signal cable
into the connector, and then tighten the screws at both sides.
Note:
• When using the 2-input cable, set the connecting input terminal
[INPUT-2] to [2LINES] under the MODE SELECT-2 Menu.
• The monitor connected to the 2-input cable by analog connection
may not be automatically recognized and setup under Plug & Play.
Perform storage of setup information manually.
Perform storage of setup information manually.
■
Connect the accessory audio cable
When the accessory audio cable is connected to the audio output termi-
nal of the computer, the sound of the connected computer is output
nal of the computer, the sound of the connected computer is output
from the monitor speakers. You can also use the headphone jack of the
display.
■
Connection of headphones (commercially available)
Headphones (commercially available) can be connected.
Note:
• When the headphones are connected, no sound can be heard from
the monitor speakers.
■
Connecting the monitor to a power source
DVI-I input terminal
(INPUT-2)
(INPUT-2)
2-input cable
(purchased separately)
(purchased separately)
DVI-D24 pin
Mini D-sub15 pin
Digital signal cable
Digital RGB
output terminal
output terminal
Analog RGB
output terminal
output terminal
Analog signal
cable
cable
Audio input terminal
Audio output terminal
Audio cable
Headphone terminal
Headphones
Power terminal
Power cord
AC outlet
Click on the first or last page to see other LL-172G service manuals if exist.