LL-171ME (serv.man5) - Sharp Monitor User Guide / Operation Manual. Page 47

Notes:
- When a normal picture is not displayed, change the signal type and/or colour system.
- Switching between AV input signals may be slow, depending on the settings in “COLOUR SYSTEM”.

If you want to speed up signal switching, switch “AUTO” in “COLOUR SYSTEM” to the current reception
colour system.

Adjusts contrast.

Adjusts the overall brightness of the screen.

Adjusts the colour depth.

Adjusts the colour tone.

Adjusts the image quality.

Adjusts the colour temperature.
- STD ................. Standard setting for colour tone.
- WARM ............. Colour tone redder than standard.

Resets adjustment values for this menu to their original factory settings.

Sets available programmes automatically. (See page E30.)

Adjusts programmes manually. (See page E31.)

Changes the programme positions freely. (See page E32.)

Erases the individual programme or programmes in a consecutive range.
(See page E32.)

Enters or changes the name of an individual programme. (See page E33.)

Selects the signal type of the external equipment connected to AV-IN1.
- AUTO .............. Original factory setting.
- CVBS .............. Composite video signal.
- Y/C .................. S-video signal.

Selects the colour system of the external equipment connected to AV-IN1:
PAL/SECAM/N358(NTSC 3.58)/N443(NTSC 4.43)/PAL60/PAL-M/PAL-N.

Sets whether to temporarily output the image and sound of AV-IN1 in TV
mode.
- OFF ................. Original factory setting.
- ON .................. Responds to the signal from AV-IN1 in TV mode.

Selects the colour system of the external equipment connected to AV-IN2:
PAL/SECAM/N358(NTSC 3.58)/N443(NTSC 4.43)/PAL60/PAL-M/PAL-N.

Resets adjustment values for this menu to their original factory settings.

LL-171ME_gb_02.PMD

2/2/2004, 2:43 PM

45