Read Sharp LB-1085 Service Manual online
LB-1085
DISASSEMBLY AND ASSEMBLY
4 – 3
2. PWBS DISASSEMBLY AND ASSEMBLY
■
Side PWB, Operation PWB disassembly and assembly
1) Remove the mini-AV terminal cover. (Refer to “
■ Mini-AV terminal cover disassembly and assembly”)
2) Disconnect 3 connectors. Remove 1 screw A (M3 x 8) and 2 screws B (M3 x 6 with washer), and remove the side PWB and the operation PWB.
■
LCD control PWB disassembly and assembly
1) Remove the rear cabinet upper. (Refer to “
■ Rear cabinet upper disassembly and assembly”)
2) Remove the 4 screws A (M3 x 6 with cupling), and remove the LCD control shield case.
3) Disconnect 7 connectors. Remove 1 screw B (M3 x 6 with cupling), and remove the LCD control PWB.
*
When installing, be careful not to pinch the harness and not to bring into contact with the FPC or not to hang on the FPC.
B
A
Pawl
Pawl
Operation PWB
Side PWB
A
B
LCD shield case
LCD control PWB
Click on the first or last page to see other LB-1085 service manuals if exist.