Read Sharp LB-1085 Service Manual online
LB-1085
DISASSEMBLY AND ASSEMBLY
4 – 6
■
Speaker terminal connection PWB disassembly and assembly
1) Remove the rear cabinet lower. (Refer to “
■ Rear cabinet lower disassembly and assembly”)
2) Remove 2 screws A (M3 x 8) and 2 screws B (M3 x 6 with washer), and remove speaker angle unit. Disconnect 2 connector. Remove 4 screws
C (M3 x 6 with washer), and remove the speaker terminal connection angle from the speaker angle.
■
Inverter PWB disassembly and assembly
1) Remove the rear cabinet right and the rear cabinet left. (Refer to “
■ Rear cabinet right, Rear cabinet left disassembly and assembly”)
2) Remove 4 screws A (M4 x 10), and remove the side cable angle. Disconnect 78 connectors, and remove 72 screws B (M3 x 6 with washer).
Remove the Inverter PWBs.
C
A
B
JACK terminal section
B
B
Connector positions
Connector positions
Screw positions
Screw positions
A
Click on the first or last page to see other LB-1085 service manuals if exist.