LB-1085 (serv.man3) - Sharp Monitor User Guide / Operation Manual. Page 19

Press POWER on the LCD Monitor, or POWER on the remote 
control unit to turn the power on.

POWER indicator (Blue): The LCD Monitor is on. (After a few seconds, 

• 

a window appears with sound.)

The initial setup starts when the LCD Monitor powers on for the fi rst 

• 

time. If the LCD Monitor has been turned on before, the initial setup will 
not be invoked. For changing the settings of the initial setup, perform 
EZ setup on the Setup menu on page 26.
When the main POWER is off, you cannot turn on the LCD Monitor by 

• 

pressing POWER.

Press POWER on the LCD Monitor, or POWER on the remote 
control unit again to turn the power off.

The LCD Monitor enters standby and the image on the screen 

• 

disappears.
The POWER indicator on the LCD Monitor turns off.

• 

If you ar

• 

e not going to use this LCD Monitor for a long period of time, be 

sure to remove the AC cord from the AC outlet.
Weak electric power is still consumed even when the LCD Monitor is in 

• 

standby mode.

POWER 

(On/Standby)

 Press   /   to select the desired language 

listed on the screen, and then press ENTER.

Language

Monitor Location

English

Español

Deutsch

Français

Monitor Location
Select “Home” or “Store” for the location where you 
plan to install the LCD Monitor.

 Press   /   to select “Home” or “Store”.

Press ENTER to enter the setting.

Monitor Location

Language

Home

Store

If you select “Home”, AV MODE is set to “STANDARD”.

• 

If you select “Store”, AV MODE is set to 

• 

“DYNAMIC (Fixed)”.
If there is no operation for 30 minutes, AV MODE will 
return to “DYNAMIC (Fixed)” automatically, regardless 
of previous changes to the AV MODE settings.
For changing the Monitor Location after the setting, 

• 

see “EZ Setup” on page 26.

When you turn on the LCD Monitor for the fi rst time, 
initial setup menu screen will appear. Set desired 
“Language” and “Monitor Location”.