LB-1085 (serv.man3) - Sharp Monitor User Guide / Operation Manual. Page 12

10º

10º

10º

10º

5 m

Remote control sensor

If the remote control fails to operate LCD Monitor functions, replace the batteries in the remote control unit.

1  Open the battery cover.

2  Insert two R-6 batteries 

(supplied with the product).

3  Close the battery cover.

 

Use manganese or alkaline batteries only.

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

Do not mix batteries of different types. Different types of batteries have different characteristics.

• 

Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause 

• 

chemical leakage in old batteries.

Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin 

• 

can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.

The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• 

If you will not be using the remote control unit for an extended period of time, remove batteries from it.

• 

Never attempt to charge non-rechargeable batteries.

• 

Use the remote control unit by pointing it towards the remote control sensor on the LCD Monitor. Objects 

between the remote control unit and the remote control sensor may prevent proper operation.

Place the batteries with their terminals corresponding to 

• 

the (+) and (-) indications in the battery compartment.

■

Do not expose the remote control unit to shock. In 

• 

addition, do not expose the remote control unit to 
liquids, and do not place in an area with high humidity.
Do not install or place the remote control unit under 

• 

direct sunlight. The heat may cause deformation of the 
remote control unit.
The remote control unit may not work properly if the 

• 

remote control sensor on the LCD Monitor is under 
direct sunlight or strong lighting. In such cases, change 
the angle of the lighting or the LCD Monitor, or operate 
the remote control unit closer to the remote control 
sensor.

The POWER indicator on the LCD Monitor should light BLUE indicating you have 

power to the LCD Monitor.
If the POWER indicator on the LCD Monitor still does not light up, press POWER on 

the remote control to turn the power on.