Read Sharp LB-1085 (serv.man2) Parts Guide online
LB-1085
ADJUSTMENT
5 – 23
6) Check to confirm that the contents set in 1) to 5) are proper.
Caution: Check to confirm that the content of [MONITOR EEP READ/WRITE] is set to [READ] and that the value of
[MONITOR EEP ADR] is set to [0xA]. If the content of [MONITOR EEP READ/WRITE] is set to [WRITE], the
time is changed. In addition, if the content of [MONITOR EEP ADR] is wrong, the system will fall into an
time is changed. In addition, if the content of [MONITOR EEP ADR] is wrong, the system will fall into an
abnormality and it may be permanently damaged.
7) If the items are correct, press [ENTER] button.
8) Put down the content of [MONITOR EEP DATA].
*
Corresponds to the value of [A] of the procedure 1) of the above [10-3. SETTING OF THE BACKLIGHT USAGE
ACCUMULATED TIME].
ACCUMULATED TIME].
9) Use SELECT (
/
) key of the machine to shift the cursor to [MONITOR EEP READ/WRITE].
10) Use VOL (+/-) key to set the content of [MONITOR EEP READ/WRITE] to [READ].
11) Use SELECT (
/
) key of the machine to shift the cursor to [MONITOR EEP ADR].
12) Use VOL (+/-) key to set the content of [MONITOR EEP ADR] to [0xB].
13) Use SELECT (
/
) key of the machine to shift the cursor to [MONITOR EEP READ/WRITE].
14) Check to confirm that the contents set in 6) to 13) are proper.
Caution: Check to confirm that the content of [MONITOR EEP READ/WRITE] is set to [READ] and that the value of
[MONITOR EEP ADR] is set to [0xB]. If the content of [MONITOR EEP READ/WRITE] is set to [WRITE], the
time is changed. In addition, if the content of [MONITOR EEP ADR] is wrong, the system will fall into an
abnormality and it may be permanently damaged.
abnormality and it may be permanently damaged.
15) If the items are correct, press [ENTER] button.
16) Put down the content of [MONITOR EEP DATA].
*
Corresponds to the value of [B] of the procedure 1) of the above [10-3. SETTING OF THE BACKLIGHT USAGE
ACCUMULATED TIME].
17) Use SELECT (
/
) key of the machine to shift the cursor to [MONITOR EEP READ/WRITE].
18) Use VOL (+/-) key to set the content of [MONITOR EEP READ/WRITE] to [READ].
19) Use SELECT (
/
) key of the machine to shift the cursor to [MONITOR EEP ADR].
20) Use VOL (+/-) key to set the content of [MONITOR EEP ADR] to [0xC].
21) Use SELECT (
/
) key of the machine to shift the cursor to [MONITOR EEP READ/WRITE].
22) Check to confirm that the contents set in 17) to 21) are proper.
Caution: Check to confirm that the content of [MONITOR EEP READ/WRITE] is set to [READ] and that the value of
[MONITOR EEP ADR] is set to [0xC]. If the content of [MONITOR EEP READ/WRITE] is set to [WRITE], the
time is changed. In addition, if the content of [MONITOR EEP ADR] is wrong, the system will fall into an
abnormality and it may be permanently damaged.
abnormality and it may be permanently damaged.
23) If the items are correct, press [ENTER] button.
24) Put down the content of [MONITOR EEP DATA].
*
Corresponds to the value of [C] of the procedure (1) of the above [10-3. SETTING OF THE BACKLIGHT USAGE
ACCUMULATED TIME].
25) Use SELECT (
/
) key of the machine to shift the cursor to [MONITOR EEP READ/WRITE].
26) Use VOL (+/-) key to set the content of [MONITOR EEP READ/WRITE] to [READ].
27) Use SELECT (
/
) key of the machine to shift the cursor to [MONITOR EEP ADR].
28) Use VOL (+/-) key to set the content of [MONITOR EEP ADR] to [0xD].
29) Use SELECT (
/
) key of the machine to shift the cursor to [MONITOR EEP READ/WRITE].
30) Check to confirm that the contents set in 25) to 29) are proper.
Caution: Check to confirm that the content of [MONITOR EEP READ/WRITE] is set to [READ] and that the value of
[MONITOR EEP ADR] is set to [0xD]. If the content of [MONITOR EEP READ/WRITE] is set to [WRITE], the
time is changed. In addition, if the content of [MONITOR EEP ADR] is wrong, the system will fall into an
abnormality and it may be permanently damaged.
31) If the items are correct, press [ENTER] button.
32) Put down the content of [MONITOR EEP DATA].
*
Corresponds to the value of [D] of the procedure (1) of the above [10-3. SETTING OF THE BACKLIGHT USAGE
ACCUMULATED TIME].
Click on the first or last page to see other LB-1085 (serv.man2) service manuals if exist.