R-962M (serv.man2) - Sharp Home Appliance User Guide / Operation Manual. Page 9

Read Sharp R-962M (serv.man2) User Guide / Operation Manual online

7
E
900W
MAFF HEATING CATEGORY
Model R-962M has a microwave output power of
900 Watts; heating category E.
The heating category (a letter A to E) was
developed by MAFF (Ministry of Agriculture,
Fisheries and Food) with microwave oven and food
manufacturers and indicates the ability of the oven
to heat small quantities of food (up to 500g [1lb
2oz]). It does not represent the general
performance of the oven.
Microwave output power in
watts (based on international
(IEC 705) standard).
600  700  800  900  1000 Watts
OVEN 
OUTPUT 
POWER
Less heating time required
More heating time required
Letter representing the oven
heating category.
Microwave 
Symbol.
A       B       C      D       E
OVEN 
OUTPUT
CATEGORY
Less heating time required
More heating time required
Food packs carry cooking instructions for heating
categories A to E.  Follow instructions for the letter
corresponding to the oven's heating category. 
The higher the output power and heating category
of the oven the less heating time is required, as
shown opposite.
Your oven is fitted with a 12-hour clock. To set the time of day, follow the guidelines given in the example below:
EXAMPLE:
To set the time of day, 12:35.
7. Press the AUTO START/ CLOCK
key again to set the clock.
1. Press the AUTO START/CLOCK 
key once.
Check the display.
5. Press the AUTO START/
CLOCK  key again.
6. Enter the minutes by pressing the
10 MIN key three times and the
1 MIN key five times. 
2. Enter the hours, by pressing
the 10 MIN key once and
the 1 MIN key twice.
x1
x1
x1
x2
x3
x5
x1
SETTING THE CLOCK
NOTES:
• If the oven is in cooking or timer mode and you wish to know the time of day, press the AUTO
START/CLOCK key. As long as your finger is pressing the key, the time of day will be displayed.
• If the electrical power supply to your microwave oven is interrupted, plug in the oven again, then open
and close the oven door. The display will show “.0”. If this occurs during cooking, the programme will
be erased. The time of day will also be erased.
• If the clock is set and cooking is complete, the display will return to show the correct time of day. If the
clock has not been set, the display will show “.0”.
R-962M O/M FINAL  28/6/99  12:30 pm  Page 7
Page of 36
Display

Click on the first or last page to see other R-962M (serv.man2) service manuals if exist.