R-952M - Sharp Home Appliance Service Manual (repair manual). Page 16

R-952M  -  16

Remove the door assembly, refer to items 1 to 4 of “DOOR

REPLACEMENT”.

1. Place the door assembly on a soft cloth with facing up.
2. Remove the choke cover, referring to “CHOKE COVER

REMOVAL”.

3. Remove the eight (8) screws holding the door frame to

the door panel assembly.

4. Release the  door frame from door assembly. Now, the

door frame is free.

5. Remove the two (2) glass stopper holding door glass to

the door frame.

6. Slide the door glass to the up side until stopped by door

frame.

7. Lift up the door glass, now the door glass is free.

1. Remove the choke cover, referring to “CHOKE COVER

REMOVAL”.

2. Release the latch spring from the tabs of the door

panel.

3. Release the latch spring from the latch head.
4. Release the latch head from the door panel.
5. Now, the latch head is free.

 

1)  

isconnect the supply.

2)  

oor opened, and wedged open

3)  

ischarge high voltage capactior

RE-WIRING

Ensure the following:

1.  Wires must not touch:

a)  High voltage parts.

(Magnetron, high voltage transformer, high voltage capacitor and high voltage rectifier assembly)

b)  Parts that become hot.

(Heating elements, oven lamp, oven cavity magnetron and high voltage transformer)

c)  Sharp edges

(Bottom plates, oven cavity, waveguide flange, chassis support and other metallic parts)

d)  Movable parts

(Fan blade, any motor, switch lever and open button)

2.  Positive lock connectors are fitted correctly.  Ensure the locking pin is located correctly.
3.  Wires are connected correctly as per pictorial diagram.
4.  No wire leads are trapped by the outer wrap.