Read Sharp R-951M Service Manual online
R-951M - 12
52
P14
OUT
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P20 - P23
terminal while one of G6 line keys on matrix is touched.
terminal while one of G6 line keys on matrix is touched.
53
P13
OUT
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P20 - P23
terminal while one of G4 line keys on matrix is touched.
terminal while one of G4 line keys on matrix is touched.
54
P12
OUT
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P20 - P23
terminal while one of G3 line keys on matrix is touched.
terminal while one of G3 line keys on matrix is touched.
55
P11
OUT
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P20 - P23
terminal while one of G1 line keys on matrix is touched.
terminal while one of G1 line keys on matrix is touched.
56
P10
OUT
Terminal not used.
57-60
SEG33-SEG30
Terminal not used.
61-90
SEG29-SEG0
OUT
Segment data signal.
Connected to LCD.
The relation between signals are as follows:
The relation between signals are as follows:
LSI signal (Pin No.)
LCD (Pin No.)
LSI signal (Pin No.) LCD (Pin No.)
SEG 0 (90) ................................ 1
SEG15 (75) ........................... 29
SEG 1 (89) ................................ 2
SEG16 (74) ........................... 28
SEG 2 (88) ................................ 3
SEG17 (73) ........................... 27
SEG 3 (87) ................................ 4
SEG18 (72) ........................... 26
SEG 4 (86) ................................ 5
SEG19 (71) ........................... 25
SEG 5 (85) ................................ 6
SEG20 (70) ........................... 24
SEG 6 (84) ................................ 7
SEG21 (69) ........................... 11
SEG 7 (83) ................................ 8
SEG22 (68) ........................... 23
SEG 8 (82) ................................ 9
SEG23 (67) ........................... 22
SEG 9 (81) .............................. 10
SEG24 (66) ........................... 12
SEG10 (80) ............................. 34
SEG25 (65) ........................... 13
SEG11 (79) ............................. 33
SEG26 (64) ........................... 14
SEG12 (78) ............................. 32
SEG27 (63) ........................... 15
SEG13 (77) ............................. 31
SEG28 (62) ........................... 16
SEG14 (76) ............................. 30
SEG29 (61) ........................... 17
91
VCC
IN
Connected to GND.
92
VREF
IN
Connected to GND.
93
AVSS
IN
Connected to VC.
94
COM3
OUT
Common data signal: COM3.
Connected to LCD (Pin No. 21).
95
COM2
OUT
Common data signal: COM2.
Connected to LCD (Pin No. 20).
96
COM1
OUT
Common data signal: COM1.
Connected to LCD (Pin No. 19).
97
COM0
OUT
Common data signal: COM0.
Connected to LCD (Pin No. 18).
98-99
VL3-VL2
IN
Power source voltage input terminal.
Standard voltage for LCD.
100
C2
IN
Terminal not used.
Pin No.
Signal
I/O
Description
TOUCH CONTROL
CONT
...
49
P17
OUT
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P20 - P23
terminal while one of G12 line keys on matrix is touched.
terminal while one of G12 line keys on matrix is touched.
50
P16
OUT
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P20 - P23
terminal while one of G10 line keys on matrix is touched.
terminal while one of G10 line keys on matrix is touched.
51
P15
OUT
Key strobe signal.
Signal applied to touch-key section. A pulse signal is input to P20 - P23
terminal while one of G8 line keys on matrix is touched.
terminal while one of G8 line keys on matrix is touched.
Click on the first or last page to see other R-951M service manuals if exist.