R-92STM (serv.man4) - Sharp Home Appliance User Guide / Operation Manual. Page 11

GB-9

ENGLISH

Plug in the oven. The oven display will display: “0:00”, an audible signal will sound once.

This model has a clock function and the oven uses less than 1.0 W in stand by mode. To set the clock, see below.

There are two setting modes: 12 hour clock and 24 hour clock.
1.  To set the 24 hour clock, press the CLOCK/DELAY START button once and “24H” will appear in the display. To 

set the 12 hour clock, press the CLOCK/DELAY START button once more and “12H” will appear in the display.

2.  Rotate the ENTRY dial until the correct hour is displayed, the input time should be within 0-23 (24-hour 

clock) or 1 -12 (12-hour clock). 

3. Press the CLOCK/DELAY START button, the minute fi gure will fl ash.
4.  Set the minutes. Rotate the ENTRY dial until the correct minutes are displayed, the input time should be 

within 0-59.

5. Press the CLOCK/DELAY START button once to start the clock. The icon “:” of the digital time will be fl ashing 

on the display. 

NOTES:
•  If the clock is set, when cooking is complete, the display will show the correct time of day. If the clock has not 

been set, the display will show "0:00".  

•  To check the time of day during a cooking process, press CLOCK/DELAY START button and the LED will 

display the time of day for 2-3 seconds. This does not aff ect the cooking process.

•  In the process of clock setting, if the STOP/CLEAR button is pressed, the oven will go back to the former setting.
•  If the electrical power supply to your microwave oven is interrupted, the display will intermittently show "0:00" after the 

power is reinstated. If this occurs during cooking, the programme will be erased. The time of day will also be erased.

Power Level

Press the MICRO. 

POWER button 

Display 

(Percentage)

Display 

(Indicators 

that light up)

•  Your oven has 5 power levels, as shown.
•  To change the power level for cooking, press 

the  MICRO. POWER button or rotate the 
ENTRY dial key until the display indicates the 
desired level. Press the START/+30sec./ENTER 
button to confi rm, enter the cooking time and 
then press the START/+30sec./ENTER button 
to start the oven.

•  To check the power level during cooking, press 

the MICRO. POWER button, the current power 
level will be displayed for 2-3 seconds. The oven 
continues to count down although the display 
will show the power level.

HIGH

x1

P100

(100%)

 

MEDIUM 
HIGH

x2

P80

(80%)

 

MEDIUM

x3

P50

(50%)

 

MEDIUM LOW 
(DEFROST)

x4

P30

(30%)

 

LOW

x5

P10

(10%)

 

Generally the following recommendations apply: 

P100 - (HIGH output = 900W) used for fast cooking or 
reheating e.g. for casseroles, hot beverages, vegetables 
etc.
P80 - (MEDIUM HIGH output = 720W) used for longer 
cooking of dense foods such as roast joints, meat loaf 
and plated meals, also for sensitive dishes such as 
sponge cakes. At this reduced setting, the food will 
cook evenly without over cooking at the sides.
P50 - (MEDIUM output = 450W ) for dense foods 
which require a long cooking time when cooked 
conventionally, e.g. beef casserole, it is advisable to use 
this power setting to ensure the meat will be tender.

P30 - (MEDIUM LOW output = 270W Defrost setting) 
to defrost, select this power setting, to ensure that 
the dish defrosts evenly. This setting is also ideal for 
simmering rice, pasta, dumplings and cooking egg 
custard.
P10 - (LOW output = 90W) for gentle defrosting, e.g. 
cream gateaux or pastry.