R-86STM (serv.man15) - Sharp Home Appliance User Guide / Operation Manual. Page 9

7

Your oven comes pre-set in Energy Save Mode (see page 9 for details).

To operate the oven in Energy Save Mode:
1. Plug in the oven. Nothing will appear on the display at this time.
2. Open the door.

The display will flash:

3. Close the door.

The display will show:

NOTES: In Energy Save Mode, if you do not operate the oven for 3 minutes or more (i.e. after closing 

the door, pressing the STOP/CLEAR key, or at the end of cooking), you will not be able to 
operate the oven until you open and close the oven door.

 

 When new, the very first time the grills are used, smoke and odour will be given off.
To avoid this happening when food is being cooked, heat the grills without food for approx. 
20 minutes. (Please refer to note on page 12.)

 HIGH 

x 

1 

100%

  

 

(100P)

 MEDIUM HIGH 

x 2 

70%

  

 

(70P)

 MEDIUM 

x 

3 

50%

  

 

(50P)

  MEDIUM LOW 

x 4 

30%

 (Defrost) 

 

(30P)

 LOW 

x 

5 

10%

 (Defrost) 

 

(10P)

• Your oven has 5 power levels, as shown 

opposite.

• To change the power level for cooking, enter 

the cooking time and then press the MICRO 
POWER key.

Power level:
The microwave power level is varied by the 
microwave energy switching on and off.
When using power levels other than 100% you 
will be able to hear the microwave energy 
pulsing on and off as the food cooks or defrosts. 

IMPORTANT: The microwave power level 
will cook at 100% unless you press the 
MICRO POWER key to the desired setting.

To check the microwave

 power level during 

cooking, press the MICRO POWER key. As 
long as your finger is pressing the MICRO 
POWER key the power level will be displayed. 
The oven continues to count down although the 
display will show the power level.

R-86STM_EN.indd   7

R-86STM_EN.indd   7

2/19/08   4:50:29 PM

2/19/08   4:50:29 PM