Read Sharp R-82FBSTM (serv.man2) Service Manual online
R-82FBSTM - 8
POWER OUTPUT
ON TIME
OFF TIME
100%
54 sec.
0 sec.
90%
49 sec.
5 sec.
80%
45 sec.
9 sec.
70%
40 sec.
14 sec.
60%
36 sec.
18 sec.
50%
29 sec.
25 sec.
40%
24 sec.
30 sec.
30%
18 sec.
36 sec.
20%
13 sec.
41 sec.
10%
9 sec.
45 sec.
AUTOMATIC COOKING
PIZZA
BREAKFAST
EXPRESS COOK
EXPRESS DEFROST
MEAL IN ONE
Above functions are automatic cooking. They automati-
cally work out the correct cooking mode and cooking time
and/or cooking temperature. They will cook according to
the special cooking sequence.
BREAKFAST
EXPRESS COOK
EXPRESS DEFROST
MEAL IN ONE
Above functions are automatic cooking. They automati-
cally work out the correct cooking mode and cooking time
and/or cooking temperature. They will cook according to
the special cooking sequence.
AUTO POWER CONTROL OPERATION
The magnetron, top or bottom heating elements, the fan
motor or the convection motor will operate in accordance
with following specification.
motor or the convection motor will operate in accordance
with following specification.
The power level is not reduced 1 time cooking. But only in case same menu is repeated within
1min 15sec, the power level of micro and grill is reduced from 100% to 70% in 20mins after
starting of last cooking. (Even if the time of the last cooking is longer than 20mins, the power
level isn't reduced on the last cooking, and it is reduced from the beginning of the next
cooking.) However, in time calculated from the start of the 1st cooking, even if the Cook mode
changed, when repetition cooking of the menu with which 100% of top & bottom heaters
continues are performed, as shown in the following table, the power down of the cooking of
the 2nd henceforth is carried out. (The 1st cooking is not applied)
1min 15sec, the power level of micro and grill is reduced from 100% to 70% in 20mins after
starting of last cooking. (Even if the time of the last cooking is longer than 20mins, the power
level isn't reduced on the last cooking, and it is reduced from the beginning of the next
cooking.) However, in time calculated from the start of the 1st cooking, even if the Cook mode
changed, when repetition cooking of the menu with which 100% of top & bottom heaters
continues are performed, as shown in the following table, the power down of the cooking of
the 2nd henceforth is carried out. (The 1st cooking is not applied)
In case same cooking mode is repeated within 1min 15sec (including stop, end), oven
calculates total cooking time and reduce the power level.
calculates total cooking time and reduce the power level.
1. OUTPUT POWER CONTROL (MANUAL COOK)
OPERATION MODE
DEVICE
POWER CONTROL
MICROWAVE (100%)
SINGLE OPERATION
SINGLE OPERATION
Microwave
100% 20min, then 70%
TOP GRILL (100%)
SINGLE OPERATION
Top heater
100% 15min, then 50%
BOTTOM GRILL (100%)
SINGLE OPERATION
Bottom heater
100% 15min, then 50%
TOP(100%)/BOTTOM(100%)
Top heater
100% 6min then 70% and 70% 9min then 50%
DUAL OPERATION
Bottom heater
100% 6min then 70% and 70% 9min then 50%
MICRO(100%)/TOP GRILL(100%)
Microwave
100% 20min, then 70%
DUAL OPERATION
Top heater
100% 15min, then 50%
MICRO(70 - 10%)/TOP GRILL(100%)
Microwave
-
DUAL OPERATION
Top heater
100% 15min, then 50%
MICRO(100%)/BOTTOM GRILL(100%)
Microwave
100% 20min, then 70%
DUAL OPERATION
Bottom heater
100% 15min, then 50%
MICRO(70 - 10%)/BOTTOM GRILL(100%)
Microwave
-
DUAL OPERATION
Bottom heater
100% 15min, then 50%
Microwave
Repeat Cook
Top heater
Bottom heater
2. OUTPUT POWER CONTROL (AUTO COOK)
Repeat Auto Cook
OPERATION SEQUENCE
3. The relay RY3 is energized and the main supply voltage is
applied to the top grill heating element.
4. The relay RY2 is energized and the microwave energy is
generated by magnetron.
5. Now, the food is cooked by microwave and top grill simulta-
neously.
MICROWAVE AND BOTTOM GRILL
(Figure O-5c
)
Rotate the COOKING MODE dial to
DUAL 3 setting, and
enter the desired cooking time by rotating the TIME/WEIGHT
dial. Press MICROWAVE POWER LEVEL button to set the
desired microwave power. When the START button is pressed,
the following operations occur:
dial. Press MICROWAVE POWER LEVEL button to set the
desired microwave power. When the START button is pressed,
the following operations occur:
1. The numbers on the digital readout start the count down to
zero.
2. The oven lamp, cooling fan motor and turntable motor are
energized.
3. The relay RY4 is energized and the main supply voltage is
applied to the bottom grill heating element.
4. The relay RY2 is energized and the microwave energy is
generated by magnetron.
5. Now, the food is cooked by microwave and bottom grill
simultaneously.
Click on the first or last page to see other R-82FBSTM (serv.man2) service manuals if exist.