Read Sharp R-82FBSTM (serv.man2) Service Manual online
R-82FBSTM - 7
OPERATION SEQUENCE
GRILL COOKING CONDITION
TOP GRILL (Figure O-3a)
In this condition the food is cooked by the top grill heating
element . Rotate the COOKING MODE dial to
In this condition the food is cooked by the top grill heating
element . Rotate the COOKING MODE dial to
TOP GRILL
setting. Enter the desired cooking time by rotating the TIME/
WEIGHT dial. When the START button is pressed, the following
operations occur:
WEIGHT dial. When the START button is pressed, the following
operations occur:
1. The numbers on the digital readout start the count down to
zero.
2. The oven lamp, cooling fan motor and turntable motor are
energized.
3. The relay RY3 is energized and the main supply voltage is
applied to the top grill heating element.
4. Now, the food is cooked by the top grill heating element.
BOTTOM GRILL
(Figure O-3b)
In this condition the food is cooked by bottom grill heating
element energy. Rotate the COOKING MODE dial to
element energy. Rotate the COOKING MODE dial to
BOT-
TOM GRILL setting. Enter the desired cooking time by rotating
the TIME/WEIGHT dial. When the START button is pressed, the
following operations occur:
the TIME/WEIGHT dial. When the START button is pressed, the
following operations occur:
1. The numbers on the digital readout start the count down to
zero.
2. The oven lamp, cooling fan motor and turntable motor are
energized.
3. The relay RY4 is energized and the main supply voltage is
applied to the bottom grill heating element.
4. Now, the food is cooked by the bottom grill heating element.
TOP AND BOTTOM GRILLS
(Figure O-3c)
In this condition the food is cooked by top and bottom grill heating
elements energy. Rotate the COOKING MODE dial to
elements energy. Rotate the COOKING MODE dial to
TOP
AND BOTTOM GRILLS setting. Enter the desired cooking time
by rotating the TIME/WEIGHT dial. When the START button is
pressed, the following operations occur:
by rotating the TIME/WEIGHT dial. When the START button is
pressed, the following operations occur:
1. The numbers on the digital readout start the count down to
zero.
2. The oven lamp, cooling fan motor and turntable motor are
energized.
3. The relay RY4 is energized and the main supply voltage is
applied to the bottom grill heating element.
4. The relay RY3 is energized and the main supply voltage is
applied to the top grill heating element.
5. Now, the food is cooked by the top and bottom grill heating
elements.
CONVECTION COOKING CONDITION
PRE-HEATING
(Figure O-4)
Rotate the COOKING MODE dial to the
convection setting
and programme the desired convection temperature by touching
CONVECTION button. When the STARTbutton is touched, the
following operations occur:
1. The coil shut-off relays RY1 and RY6 are energized, the oven
CONVECTION button. When the STARTbutton is touched, the
following operations occur:
1. The coil shut-off relays RY1 and RY6 are energized, the oven
lamp, cooling fan motor and turntable motor are turned on.
2. The coil shut-off relays RY3 and RY4 are energized by
control unit and the main supply voltage is added to the top
and bottom heating elements.
and bottom heating elements.
3. When the oven temperature reaches the selected pre-heat
temperature, the following operations occur:
3-1. The coil shut-off relays RY3 and RY4 are energized by
control unit temperature circuit and thermistor, opening the
circuit to the top and bottom grill heating elements.
circuit to the top and bottom grill heating elements.
CONVECTION COOKING
(Figure O-4)
When the pre-heat temperature is reached, a beep signal will
sound indicating that the holding the temperature has been
reached in the oven cavity. Open the door and place the food to
be cooked in the oven. Rotate the COOKING MODE dial to the
sound indicating that the holding the temperature has been
reached in the oven cavity. Open the door and place the food to
be cooked in the oven. Rotate the COOKING MODE dial to the
convection setting and enter the cooking time by rotating the
TIME/WEIGHT dial. Select the desired cooking temperature by
pressing the CONVECTION button. When the START button is
pressed, the following operations occur:
1. The numbers on the digital readout start the count down to
pressing the CONVECTION button. When the START button is
pressed, the following operations occur:
1. The numbers on the digital readout start the count down to
zero.
2. The oven lamp, cooling fan motor, turntable motor and
convection motor are energized.
NOTE: When the convection temperature 40˚C is selected, the
convection motor is not energized.
3. The relays RY3 and RY4 are energized (if the cavity
temperature is lower than selected temperature) and the
main supply voltage is applied to the top and bottom heat-
ing elements to return to the selected cooking temperature.
main supply voltage is applied to the top and bottom heat-
ing elements to return to the selected cooking temperature.
4. Upon completion of the cooking time, the audible signal will
sound, and the oven lamp, turntable motor, cooling fan
motor, convection motor, top and bottom heating elements
are de-energized. At the end of convection cycle, if the cavity
air temperature rises above 120˚C, the circuit to the relay
RY6 will be maintained (by the thermistor circuit) to continue
operation of the cooling fan motor until temperature drops
below 105˚C, at that time the relay RY6 will be de-energized,
turning off the fan motor.
motor, convection motor, top and bottom heating elements
are de-energized. At the end of convection cycle, if the cavity
air temperature rises above 120˚C, the circuit to the relay
RY6 will be maintained (by the thermistor circuit) to continue
operation of the cooling fan motor until temperature drops
below 105˚C, at that time the relay RY6 will be de-energized,
turning off the fan motor.
DUAL COOKING CONDITION
MICROWAVE AND CONVECTION
(Figure O-5a)
Rotate the COOKING MODE dial to
DUAL 1 setting. Enter
the desired cooking time by rotating the TIME/WEIGHT dial.
Press MICROWAVE POWER LEVEL button to set the desired
microwave power. Press the CONVECTION button to set the
cooking temperature. When the START button is pressed, the
following operations occur:
Press MICROWAVE POWER LEVEL button to set the desired
microwave power. Press the CONVECTION button to set the
cooking temperature. When the START button is pressed, the
following operations occur:
1. The numbers on the digital readout start the count down to
zero.
2. The oven lamp, cooling fan motor, turntable motor and
convection motor are energized.
3. The relay RY3 will be energized and the main supply voltage
is applied to the top grill heating element.
4. The relay RY4 is energized (if the cavity temperature is lower
than selected temperature) and the main supply voltage is
applied to the bottom heating element.
applied to the bottom heating element.
5. The relay RY2 is energized and the microwave energy is
generated by magnetron.
6. Now, the food is cooked by microwave and convection
energy simultaneously.
MICROWAVE AND TOP GRILL (Figure O-5b)
Rotate the COOKING MODE dial to
DUAL 2 setting, and
enter the desired cooking time by rotating the TIME/WEIGHT
dial. Press MICROWAVE POWER LEVEL button to set the
desired microwave power. When the START button is pressed,
the following operations occur:
dial. Press MICROWAVE POWER LEVEL button to set the
desired microwave power. When the START button is pressed,
the following operations occur:
1. The numbers on the digital readout start the count down to
zero.
2. The oven lamp, cooling fan motor and turntable motor are
energized.
Click on the first or last page to see other R-82FBSTM (serv.man2) service manuals if exist.