R-793 (serv.man9) - Sharp Home Appliance User Guide / Operation Manual. Page 12

Read Sharp R-793 (serv.man9) User Guide / Operation Manual online

Touch here to go to
NEXT STAGE
2 . 00
Press the START key
MICRO 10 %
100 %
10 %
30 %
50 %
70 %
2 . 00
MICRO 10 %
10
HOW TO OPERATE THE OVEN
DEFROSTING
Opening and closing the door:
• To open the oven door, pull the door opening handle.
• The oven lamp will light when the door is open.
• Close the door firmly and the lamp will go out.
MICROWAVE COOKING:
EXAMPLE:
To cook on 10% power for 2 minutes.
1. Enter the cooking time, 200
by touching the numbers on the
screen. Check the top line of the
display. And then touch
POWER.
2. Choose desired power by
touching 10%.
Display will count down
through cooking time.
3. Press the START/AUTO
MINUTE key once to start
cooking.
2
3
1
5
6
4
8
9
7
0
POWER
MODE
2 . 00
2 . 00
-1 MIN
+1 MIN
MICRO 10 %
NOTES:
• Your oven can be programmed up to 99 minutes, 99 seconds.
• When the door is opened during cooking, the cooking time on the display
stops. The cooking time starts to count down again when the door is closed
and the START/AUTO MINUTE key is pressed.
• You can change the cooking time after pressing the  START/AUTO MINUTE
key.
Touch 
▼  - 1 MIN or + 1 MIN ▲ on the screen to decrease or increase the
cooking or defrosting time in multiples of 1 minute whilst the oven is in use.
The overall cooking time can be increased to a maximum of 99 minutes. It is
also possible to increase time during cooking by pressing the START/AUTO
MINUTE 
key. This increases the cooking time by 1 minute with each press.
To defrost foods not included in the Express Defrost menu, use microwave power levels 30% or 10%. Stir or
turn food at least 2-3 times during defrosting, shield if necessary. After defrosting, wrap in aluminium foil and
leave to stand until thoroughly defrosted. Refer to the defrosting charts in the Cookery Book section.
R-793M O/M & C/B  08/06/2000  15:12  Page 10
Page of 72
Display

Click on the first or last page to see other R-793 (serv.man9) service manuals if exist.