R-774M (serv.man8). Part 1 - Sharp Home Appliance User Guide / Operation Manual. Page 8

7

Website: http://www.sharp.co.uk/support

Help Line: 08705 274277 (office hours)

Your oven has an Energy Save Mode. This facility saves electricity when the oven is not in use.
When you have unpacked your oven and assembled the turntable correctly (please refer to page 2) plug the
oven into your electricity supply. Open & close the door. “0” will appear on the display. The oven is now
ready for use.
The oven will default to Energy Save Mode after 3 minutes if not used. In Energy Save Mode the display is
blank and the oven cannot be operated.
To cancel Energy Save Mode:
i) Open & close the door. “0” will be displayed and the oven is ready for use.
ii) Set the clock. Please refer to “Setting the clock” on page 8. (To revert back to Energy Save Mode, follow
the procedure below).
Note: If you unplug your oven at any stage you will have to reset the clock to cancel Energy Save Mode.

To start Energy Save Mode when the clock is set.

1. Make sure the correct

time appears on the
display.

2. Press the KITCHEN TIMER/

CLOCK SET key three times.

3. Press the START/AUTO MINUTE

key. The power will be off and the
display will show nothing.

Your oven has an energy save mode.

1. Plug in the oven. Nothing will appear on the

display at this time.

2. Open the door, the display will flash the message

shown opposite.

3. Close the door. The display wil show “.0”. If you

set the clock “energy save” mode will be off. If
you keep “energy save” mode, go to step 5.

4. Set the clock, refer to page 8.

5. Heat the oven using the upper and lower grills

without food for 20 minutes. (For operation, see
NOTES on page 10).

1.

2.

3.

R-774M O/M  21/03/2001  15:03  Page 7