Read Sharp R-743 (serv.man6) User Guide / Operation Manual online
SETTING THE CLOCK
6
x1
x5
x9
Your oven is fitted with a clock which can be set to the time of day.
There are two setting modes: 12-hour clock and 24 hour-clock.
There are two setting modes: 12-hour clock and 24 hour-clock.
To set the 12 hour-clock, hold the
MICRO/GRILL/DUAL key for three seconds.
“12H” will appear on the display.
MICRO/GRILL/DUAL key for three seconds.
“12H” will appear on the display.
To set the 24 hour-clock, press the
MICRO/GRILL/DUAL key once more after step 1, in
the example below. “24H” will appear in the display.
MICRO/GRILL/DUAL key once more after step 1, in
the example below. “24H” will appear in the display.
Example:
To set the 24 hour clock to 22:59 :
To set the 24 hour clock to 22:59 :
x2
x2
3. Press 10 MINUTE
key twice and the 1
MINUTE key twice to
enter the hours.
MINUTE key twice to
enter the hours.
1. Press MICRO/GRILL/
DUAL key and hold for
three seconds.
three seconds.
4. Press MICRO/GRILL/
DUAL key once.
Check the display.
6. Press MICRO/GRILL/
DUAL key once to start
the clock.
the clock.
5. Press 10 MINUTE key 5
times and the 1 MINUTE
key 9 times to enter
the minutes.
key 9 times to enter
the minutes.
STIR
TURN
KG/ %
GRILL
MICRO COOK
GRILL
DUAL
MICRO
GRILL
DUAL
MICRO
GRILL
DUAL
MICRO
x1 for three
seconds
seconds
GRILL
DUAL
MICRO
10min.
1min.
10min.
1min.
x1
x1 for three secs
2. Select the 24 hour clock.
GRILL
DUAL
MICRO
x1
NOTE:
1. If you press any of the time keys too many times, continue to press until
1. If you press any of the time keys too many times, continue to press until
your desired time appears.
2. Press the STOP/CLEAR key if you make a mistake during programming.
3. If the electrical power supply to your microwave oven is interrupted, the
3. If the electrical power supply to your microwave oven is interrupted, the
display will intermittently show after the power is reinstated.
If this occurs during cooking, the programme will be erased. The time of
day will also be erased.
If this occurs during cooking, the programme will be erased. The time of
day will also be erased.
4. When you want to reset the time of day, follow the above example again.
R-743M O/M 27/1/2000 10:19 Page 6
Click on the first or last page to see other R-743 (serv.man6) service manuals if exist.