R-743 (serv.man6) - Sharp Home Appliance User Guide / Operation Manual. Page 7

5

An installation frame is available which enables the
microwave oven to be integrated within a kitchen unit.
The microwave oven is not designed to be built above
or near a conventional oven.
SHARP recommend the use of the build in kit, EBR-
4500, available from your SHARP dealer. Only the
use of this frame will guarantee the quality and safety
of the oven. When building, follow installation
instructions (for B type) supplied carefully.

IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the

power supply cord or plug.

• Insert the plug properly into the socket as the plug

may otherwise overheat and catch fire.

• Do not connect other appliances to the same socket

using an adaptor plug as it may cause the house
wiring to overheat and catch fire.

• If the plug or socket is loose or the power supply

cord is damaged, do not operate the oven, it must
be replaced with a special power cord, by the
manufacturer or their service agent or a similarly
qualified person. A defective plug, power supply
cord or socket may overheat and catch fire during
operation or cause an electrical shock. 

• When removing the plug from the socket always

grip the plug, never the power supply cord as this
may damage the power supply cord and the
connections inside the plug.

• The product is fitted with a re-wireable plug. Should

it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code given in ‘To replace the
mains plug’on page 49.

If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician. 

WARNING 
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code
given in ‘To replace the mains plug’ on page 49.

Plug in the oven.
1. The oven display will flash:

2. Press the STOP/CLEAR key the display will show:

(Heat the grill with the oven empty for 20 minutes. See
the NOTE and the instructions for grilling on page 9).

To set the clock, refer to the next page.

Use of the STOP/CLEAR key.
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.

STIR

TURN KG/% GRILL MICRO     COOK

STIR

TURN

KG/% GRILL MICRO     COOK

1.

2.

R-743M O/M  27/1/2000  10:19  Page 5