R-671M (serv.man2). For R671M Microwave Oven. - Sharp Home Appliance User Guide / Operation Manual. Page 8

Read Sharp R-671M (serv.man2) User Guide / Operation Manual online

SETTING THE CLOCK
6
These are two setting modes: 12 hour clock and 24 hour clock. Press AUTO START/CLOCK once to select the
12 hour clock, twice to select the 24 hour clock.
Example:
To set the 24 hour clock to 23:35.
AUTO START
CLOCK
AUTO START
CLOCK
AUTO START
CLOCK
1. Open and
close the door.
2. Press AUTO START
/CLOCK twice to
select the 24 hour
clock.
4. Press AUTO START
/CLOCK again.
5. Enter the minutes. Press
10MIN key 3 times
and the 1MIN key key
5 times.
6. Press AUTO START/
CLOCK again to set the
clock.
3. Enter the hours. Press
the 10 MIN key twice
and the 1Min key 3
times.
Check the display.
STIR  TURN   ADD   KG   PCS   COOK
STIR  TURN   ADD   KG   PCS   COOK
Check the display.
STIR  TURN   ADD   KG   PCS   COOK
10min.
1min.
10min.
1min.
x2
x1
x1
x3
x5
x3
x2
NOTES:
• If you press the 1MIN key just after pressing AUTO START/CLOCK key,
will appear in the display.
• If the clock is set and cooking is complete, the display will return to show the correct        
time of day. If the clock has not been set the display will show:
Your oven comes set for the energy save mode. If you do nothing for 2 minutes after preceding operation, i.e.
plugging in or end of cooking, the power will automatically turn off. To turn the power on, open and then close
the door.
If you set the clock, energy save mode does not work. To start energy save mode, follow the instruction below.
Example:
To start the energy save mode (the current time is 23:35)
ENERGY SAVE MODE
AUTO START
CLOCK
Make sure the current
time of day appears in
the display.
1. Press AUTO START
/CLOCK key.
START
AUTO MINUTE
2. Press the 1MIN key
once. The display will
show 
STIR  TURN   ADD   KG   PCS   COOK
1min.
3. Press the START/AUTO
MINUTE key. The power
will be off and the display
will show nothing.
x1
x1
x1
Page of 51
Display

Click on the first or last page to see other R-671M (serv.man2) service manuals if exist.