R-671M (serv.man2). For R671M Microwave Oven. - Sharp Home Appliance User Guide / Operation Manual. Page 7

5

IMPORTANT ELECTRICAL CONNECTION
• Do not allow water to come into contact with the

power supply cord or plug.

• Insert the plug properly into the socket as the plug

may otherwise overheat and catch fire.

• Do not connect other appliances to the same socket

using an adaptor plug as it may cause the house
wiring to overheat and catch fire.

• If the plug or socket is loose or the power supply

cord is damaged, do not operate the oven, it must
be replaced by the manufacturer or their service
agent or a similarly qualified person in order to
avoid a hazard. A defective plug, power supply
cord or socket may overheat and catch fire during
operation or cause an electrical shock.

• When removing the plug from the socket always

grip the plug, never the mains lead as this may
damage the power supply cord and the
connections inside the plug.

• The product is fitted with a re-wireable plug. Should

it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code on page 28.

If you wish to remove or replace the plug supplied,

ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a qualified
electrician. 

WARNING - IMPORTANT NOTE
Please note both the Operation Manual and Cookery
Book supplied specify 800W (IEC 705) microwave
output power. This applies only when the oven is
operated on a 230-240V supply.

If your supply is less than 230-240V, it may be
necessary to increase the cooking time when
following the Operation Manual and Cookery Book
instructions.

To wire an appropriate plug, follow the
wiring code on page 28.

Your oven has an energy save mode.
Plug in the oven. Nothing will appear in the display at that time.

1.  Open the door,               will flash in the display.
2. Close the door, the display will stop flashing.
3. Set the clock, see page 6.
4. Heat the oven using the top and bottom grills without food for 20 minutes. (For operation see NOTES on
page 9)

Use the STOP/CLEAR key to:

1. Erase a mistake during programming .
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, press twice.