Read Sharp R-641AM (serv.man2) User Guide / Operation Manual online
5
INSTALLATION
WARNING:
It is hazardous for anyone other than a
competant person to carry out any service
or repair operation which involves the
removal of a cover which gives protection
against exposure to microwave energy.
competant person to carry out any service
or repair operation which involves the
removal of a cover which gives protection
against exposure to microwave energy.
BUILDING-IN-KIT.
This oven is not designed to be built into a kitchen unit.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the
This oven is not designed to be built into a kitchen unit.
IMPORTANT! ELECTRICAL CONNECTION.
• Do not allow water to come into contact with the
power supply cord or plug.
• Insert the plug properly into the socket as the plug
may otherwise overheat and catch fire.
• Do not connect other appliances to the same socket
using an adaptor plug as it may cause the house
wiring to overheat and catch fire.
wiring to overheat and catch fire.
• If the plug or socket is loose or the power supply
cord is damaged, do not operate the oven, it must
be replaced by the special power cord, part no.
QACCBA004URE1. Contact your dealer or a
Service Technician appointed by SHARP.
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause
an electrical shock.
be replaced by the special power cord, part no.
QACCBA004URE1. Contact your dealer or a
Service Technician appointed by SHARP.
A defective plug, power supply cord or socket may
overheat and catch fire during operation or cause
an electrical shock.
• When removing the plug from the socket always
grip the plug, never the mains lead as this may
damage the power supply cord and the
connections inside the plug.
damage the power supply cord and the
connections inside the plug.
• The product is fitted with a re-wireable plug. Should
it not be suitable for the socket outlet in your home,
remove the plug and fit an appropriate type,
observing the wiring code given in “To replace the
mains plug” on page 36.
remove the plug and fit an appropriate type,
observing the wiring code given in “To replace the
mains plug” on page 36.
If you wish to remove or replace the plug supplied,
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician.
ensure the plug is removed properly and not cut off.
When replacing the plug please ensure that you use a
BSI or ASTA approved plug to BS1363, this should be
fitted with a brown coloured 13 amp fuse approved
by BSI or ASTA to BS1362. If you have any doubt
about electrical connection seek the help of a
qualified electrician.
WARNING
THIS APPLIANCE MUST BE EARTHED
To wire an appropriate plug, follow the wiring code
given in “To replace the mains plug” on page 36.
To wire an appropriate plug, follow the wiring code
given in “To replace the mains plug” on page 36.
BEFORE OPERATION
Plug in the oven.
1. The oven display will flash:
2. Touch the STOP/CLEAR key the display will
1. The oven display will flash:
2. Touch the STOP/CLEAR key the display will
show:
To set the clock, see page 6.
Use of the STOP/CLEAR key.
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
Use the STOP/CLEAR key to:
1. Erase a mistake during programming.
2. Stop the oven temporarily during cooking.
3. Cancel a programme during cooking, touch twice.
1.
2.
STIR
TURN
KG / % GRILL
MICRO COOK
STIR
TURN
KG / % GRILL
MICRO COOK
Heat the oven using GRILL mode without food for
20 minutes. See note on page 9.
20 minutes. See note on page 9.
Stop / Clear
R-641M OM & CB 23/8/99 2:38 pm Page 5
Click on the first or last page to see other R-641AM (serv.man2) service manuals if exist.