R-341AM - Sharp Home Appliance Service Manual (repair manual). Page 3

R341M - 3

Servicing and repair work must be carried out only by
trained service engineers.

The parts marked '*' on the parts list and schematic
diagram have voltages in excess of 250V.

Removal of the outer wrap gives access to potential
above 250V.

All the parts marked "

∆

" on the parts list may cause undue

microwave exposure, by themselves, or when they are
damaged, loosened or removed.

Do not become exposed to radiation from the
magnetron or other parts conducting microwave
energy.  All input and output microwave
connections, waveguides, flanges and gaskets must
be secured. Never operate the device without a
microwave energy absorbing load attached. Never
look into an open waveguide or antenna while the
device is energized.

. THE WIRES IN THIS MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:
GREEN-AND-YELLOW : EARTH        BLUE : NEUTRAL        BROWN : LIVE

If the mains lead is replaced, only part number QACCBA032WRE3 should be used

Power Requirements

230 -240 Volts     50 Hertz     Single phase, 3 wire earthed

Power Consumption

1.45kW

Power Output

900  watts nominal of RF microwave energy
(measured by way of IEC 705)
Operating frequency of 2450 MHz

Case Dimensions

Width 520 mm     Height 305 mm including foot     Depth 413 mm

Cooking Cavity Dimensions

Width 342 mm     Height 207 mm     Depth 368 mm

Turntable diameter

325 mm

Control Complement

Simple Touch Control System
Clock (1.00 - 12.59 or 0.00 - 23.59)
Microwave Power for Variable Cooking
Repetition Rate:

HIGH

 Full power throughout the cooking time

MEDIUM HIGH

 approx. 70% of FULL Power

MEDIUM

 approx. 50% of FULL Power

MEDIUM LOW

 approx. 30% of FULL Power

LOW

 approx. 10% of FULL Power

START/AUTO MINUTE pad

AUTO COOK/DEFROST pad

POWER LEVEL/WEIGHT pad

MORE/LESS pads

STOP/CLEAR pad
Time pads

Set Weight

Approx. 17 kg

 

   PRODUCT DESCRIPTION