R-28STM (serv.man2) - Sharp Home Appliance User Guide / Operation Manual. Page 12

GB-10

1. SEQUENCE COOKING
This function allows you to cook using up to 3 diff erent stages which can include manual cooking times and 
mode and / or time defrost as well as weight defrost function. Once programmed there is no need to interfere 
with the cooking operation as the oven will automatically move onto the next stage. An audible signal will 
sound once after the fi rst stage. If the defrost function is needed within sequence cooking - please note that 
this should always be the fi rst stage of sequence cooking.

NOTE: Auto menu cannot be set as one of the multiple sequences.

Example: If you want to cook food for 20 minutes on P100 microwave power and then for 5 minutes with 
P80 microwave power. The steps are as follows:
- 1. Press the MICROWAVE button, P100 will appear in the LED display. 
- 2. Press the MICROWAVE button once more to confi rm the setting.
- 3. Enter the cooking time by rotating the ENTRY dial until the display shows “20:00” minutes.
- 4. Press the MICROWAVE button, P100 will appear in the LED display. 
- 5. Rotate the ENTRY dial to select the microwave power to P80.
- 6. Press the MICROWAVE button once more to confi rm the setting.
- 7. Enter the cooking time by rotating the ENTRY dial until the display shows “5:00” minutes. 
- 8. Press the START/ +1min. button to start cooking.

2.  +1min FUNCTION (Auto minute)
Direct start
You can directly start cooking on P100 microwave power level for 1 minute by pressing the START/ +1min. 
button. The cooking process will start immediately and each time the button is pressed this will increase the 
cooking time by 1 minute.

NOTE: The cooking time may be extended to a maximum of 95 minutes.

3. DELAY START
DELAY START cooking allows you to program the oven to start cooking at a point later in the day. 
Before setting, make sure the clock is set to the correct time of day.

Example:
Follow the example below for starting the microwave automatically at a later point in time for 7 minutes on P80. 
The maximum time-delay is 23 hours and 59 minutes.
- 1)  Press the MICROWAVE button. P100 will be displayed.
- 2)  Rotate the ENTRY dial to select the microwave power level to P80.
- 3)  Press the MICROWAVE button once more to confi rm the setting.
- 4)  Enter the cooking time by rotating the ENTRY dial until the display shows “7:00” minutes.
 

After the above steps, please do not press START/ +1min. button. 

- 5)  Press the CLOCK/DELAY START button. The display will show the current time and the hours fi gure will 

fl ash. Moreover the clock indicator will illuminate.

- 6)  Rotate the ENTRY dial to set the hour to the desired start time for cooking.
 

The input time should be within 0-23. 

- 7)  Press CLOCK/DELAY START button and the minutes fi gure will fl ash.
- 8)  Rotate the ENTRY dial to set the minutes of the desired start time for cooking.
 

The input time should be within 0-59 minutes.

- 9)  Press the START/ +1min. button to confi rm the setting for the delay start. The clock indicator will fl ash. 

When the pre-programmed time arrives, an audible signal will sound twice and the microwave will start 
automatically for 7 minutes on P80. At the same time the clock indicator will disappear and the microwave 
indicator and high heat indicator will appear on the display.