R-26STM (serv.man15) - Sharp Home Appliance User Guide / Operation Manual. Page 10

8

Your oven has a 12 hour and a 24 hour clock.

• To select the 12 hour clock, press and hold

the POWER LEVEL button for 3 seconds.
“12H” will appear on the display.

To set the time of day follow the instructions
opposite.

1. Select the clock type required.

2. Enter the hours by turning the

TIME/WEIGHT knob.

3. Press the POWER LEVEL button once.

4. Enter the minutes by turning the

TIME/WEIGHT knob.

5. To start the clock, press the POWER

LEVEL button once.

NOTES: 
• Press the STOP/CLEAR button if you make a

mistake during programming.

• If the clock is set, when cooking is complete,

the display will show the correct time of day.
If the clock has not been set, the display will
only show “ : ” when cooking is complete.

• If the electrical power supply to your

microwave oven is interrupted, the display will
intermittently show “88:88” after the power is
reinstated. If this occurs during cooking, the
programme will be erased. The time of day will
also be erased. 

• When you want to reset the time of day,

follow the opposite example again.

• To select the 24 hour clock, press and hold

the POWER LEVEL button for 3 seconds,
then press again.
“24H” will appear on the display.

x1 and hold for 3 seconds.

1. x1 and hold for 3 seconds.
2. x1 again.

R26STM_Part1.qxd  21/12/05  4:03 PM  Page 8