R-242M - Sharp Home Appliance Service Manual (repair manual). Page 3

R-242M - 3

Servicing and repair work must be carried out only by
trained service engineers.

The parts marked '*' on the parts list and schematic
diagram have voltages in excess of 250V.

Removal of the outer wrap gives access to potential
above 250V.

All the parts marked "

∆

" on the parts list may cause undue

microwave exposure, by themselves, or when they are
damaged, loosened or removed.

Do not become exposed to radiation from the magnetron
or other parts conducting microwave energy.  All input
and output microwave connections, waveguides, flanges
and gaskets must be secured. Never operate the
device without a microwave energy absorbing load
attached. Never look into an open waveguide or an-
tenna while the device is energized.

THE WIRES IN THIS MAINS LEAD ARE COLOURED IN

ACCORDANCE WITH THE FOLLOWING CODE:
GREEN-AND-YELLOW : EARTH        BLUE : NEUTRAL        BROWN : LIVE

If the mains lead is replaced, only part number QACCBA030WRE2 should be used

Power Requirements

230-240 Volts      50 Hertz      Single phase, 3 wire grounded

Power Consumption

1.24 kW

Power Output

800W watts nominal of RF microwave energy (measured by way of IEC 705)
Operating frequency of 2450 MHz

Case Dimensions

Width 449mm / Height 282mm including foot / Depth 385mm

Cooking Cavity Dimensions

Width 287mm / Height 220mm / Depth 313mm

Turntable diameter

272mm

Control Complement

Touch Control System
Clock(1:00-12:59 or 0:00-23:59)
Microwave Power for Variable Cooking

Repetition Rate;

HIGH ..................  Full power throughout the cooking time
MEDIUM HIGH ......................  approx. 70% of Full Power
MEDIUM ................................  approx. 50% of Full Power
MEDIUM LOW .......................  approx. 30% of Full Power
LOW ......................................  approx. 10% of Full Power

AUTO COOK/DEFROST button
POWER LEVEL button
STOP button
START button

Net Weight

Approx. 13.3 kg