Read Sharp R-22AMM (serv.man10) Service Manual online
R22AMM
10 – 7
2. UPPER AND LOWER OVEN HINGES REMOVAL
1. Remove the door assembly from oven cavity, referring to
“REMOVAL” of “DOOR REPLACEMENT AND ADJUSTMENT”.
2. Remove choke cover, referring to “CHOKE COVER REMOVAL”.
3. Release the oven hinges from the door panel.
4. Now, the oven hinges are free.
3. DOOR HANDLE REMOVAL
1. Remove the door assembly from oven cavity, “REMOVAL” of
“DOOR REPLACEMENT AND ADJUSTMENT”.
2. Place door assembly on a soft cloth with latches facing up.
3. Remove choke cover from door panel, referring to “CHOKE
COVER REMOVAL”.
4. Remove two (2) screws holding the door handle to door.
5. Remove the door handle from door panel.
6. Now, door handle is free.
UPPER AND LOWER LATCH HEADS REMOVAL
7. Remove the door release lever from the door assembly.
8. Remove the three (3) screws holding the joint plate to the door
panel.
9. Release the latch spring from the tab of the joint lever and joint
plate.
10.Release the latch heads from joint lever and joint plate.
11.Now, the latch heads are free.
4. DOOR CASE REMOVAL
1. Remove the door assembly from oven cavity, referring to
“REMOVAL” of “DOOR REPLACEMENT AND ADJUSTMENT”.
2. Remove choke cover from door panel, referring to “CHOKE
COVER REMOVAL”.
3. Remove door handle from door panel, referring to “DOOR HAN-
DLE REMOVAL”.
4. Bend up four (4) nails of door case.
5. 5. Remove door case from door panel.
6. Now, the door case is free.
DOOR GLASS REMOVAL
7. Remove the four (4) screws holding two (2) outside window fixing
plates to door panel.
8. Now, the door glass is free.
[18] Position of Weak point and Purse locks
Purse lock L
Purse lock L
Weak point FFS-GA014
